5 Pack – 3/4” UNISEAL Flexible Tank Adapter Bulkhead


UniSeal - 3/4'' uniseal flexible Tank Adapter bulkhead. For 3/8'' through 3/16'' Wall Thickness Only. 3/4'' uniseal specs: pipe id - 3/4'' Pipe OD - 1. 050'' holesaw size: 1 1/4'' or 32mm Uniseal flexible Tank Adapter bulkhead. For 3/4" pipe with an OD of 1. 050".

More information about UniSeal

1'' UNISEAL Flexible Tank Adapter Bulkhead - 5 Pack


The Uniseal Warehouse - 1'' uniseal uniseals are used to attach pipe to just about any container in situation where bulkheads will not work. Uniseal flexible Tank Adapter bulkhead. For 1" pipe with an OD of 1. 315". The most common use is on curved surfaces such as storage drums, buckets, and even other pipe. 1'' uniseal specs:pipe id - 1'' 25mmPipe OD - 1.

315'' 33mmholesaw size: 1. 75'' 44mmup to 3/8" Wall Thickness. 9mmmade in the U. S. A.

More information about The Uniseal Warehouse


Similar products



Hydro Flow Uniseal 1/2 Inch, Bag of 10


Hydro Flow GL56747280X10 - Uniseal flexible Tank Adapter bulkhead. For 1" pipe with an OD of 1. 315". Hydro flow uniseal is ideal for creating a secure seal in seconds for your reservoir or hydroponic system using pvc hard pipe or fittings. Hydro flow uniseal is ideal for creating a secure seal in seconds for your reservoir or hydroponic system using PVC hard pipe or fittings.

More information about Hydro Flow GL56747280X10


Similar products



5 Pack - 2'' UNISEAL Flexible Tank Adapter Bulkhead


UniSeal - Uniseal flexible Tank Adapter bulkhead. For 2" pipe with an OD of 2. 375". Hydro flow uniseal is ideal for creating a secure seal in seconds for your reservoir or hydroponic system using PVC hard pipe or fittings. 2'' uniseal flexible tank adapter bulkhead This 2'' Uniseal is for 2'' Pipe with an OD of 2. 375''.

Uniseal flexible Tank Adapter bulkhead. For 1" pipe with an OD of 1. 315". The hole saw size is 3. 00''. For 3/8'' through 3/16'' Wall Thickness Only.

More information about UniSeal


Similar products



2 Pack - 1" UNISEAL Flexible Tank Adapter Bulkhead


The Uniseal Warehouse - The coefficient of friction with the plastic pipe is roughly three times higher than any other material which allows it to create a better seal than with any other material. Uniseal flexible Tank Adapter bulkhead. For 1" pipe with an OD of 1. 315". Traditional seals require multiple parts such as, o-rings, rigid flanges, bolts, washers, along with long assembly times and high production costs.

It was designed to solve many of the issues of pipe to tank connections. In static conditions the seal is good up to 65 PSI. Holesaw size: 1. 75'' 44mm. Pipe id - 1'' 25mm. Pipe od - 1. 315'' 33mm. 9mm. The du pont alcryn is the key to the liquid-tight seal. Then the pipe is coated with a slippery detergent i. E. Dish soap and pushed into the seal.

2 Pack - 1" UNISEAL Flexible Tank Adapter Bulkhead - Hydro flow uniseal is ideal for creating a secure seal in seconds for your reservoir or hydroponic system using PVC hard pipe or fittings. When the pipe is pushed through the rubber-like Uniseal from the outside, the inside Alcryn wall becomes thin enough to allow the pipe to squeeze through and then forms a liquid-tight seal.

More information about The Uniseal Warehouse


Similar products



5 Pack - 1/2'' UNISEAL Flexible Tank Adapter bulkhead


The Uniseal Warehouse - Pipe id - 1'' 25mm. Pipe od - 1. 315'' 33mm. 9mm. Holesaw size: 1. 75'' 44mm. Up to 3/8" wall Thickness. Made in the USA. Uniseal flexible Tank Adapter bulkhead. For 2" pipe with an OD of 2. 375". Hydro flow uniseal is ideal for creating a secure seal in seconds for your reservoir or hydroponic system using PVC hard pipe or fittings.

Uniseal flexible Tank Adapter bulkhead. For 1" pipe with an OD of 1. 315".

More information about The Uniseal Warehouse


Similar products



1 1/2" UNISEAL Flexible Tank Adapter Bulkhead - 2 Pack


The Uniseal Warehouse - It was designed to solve many of the issues of pipe to tank connections. Pipe od - 1. 315'' 33mm. For many industries pipe to tank seals are traditionally among the most complex connections to manufacture. Holesaw size: 1. 75'' 44mm. Uniseal flexible Tank Adapter bulkhead. For 1" pipe with an OD of 1. 315". After cutting a hole in the wall of a tank or other surface, the seal is inserted.

Pipe od - 1. 90" 48mm. Uniseal products replace traditional plumbing hardware with a single injection molded unit requiring no component parts. Hydro flow uniseal is ideal for creating a secure seal in seconds for your reservoir or hydroponic system using PVC hard pipe or fittings. Uniseal can withstand pressure, sewage, oils, gasoline, acids, waste, and suction, greases, heat and cold.

1 1/2" UNISEAL Flexible Tank Adapter Bulkhead - 2 Pack - Then the pipe is coated with a slippery detergent i. E. It offers long life, easy installation and reduced labor and material costs. Holesaw size: 2. 5" 63mm.

More information about The Uniseal Warehouse


Similar products



1/2" UNISEAL Flexible Tank Adapter Bulkhead - 2 Pack


The Uniseal Warehouse - 9mm. Up to 3/8" wall Thickness. Uniseal flexible Tank Adapter bulkhead. For 2" pipe with an OD of 2. 375". It offers long life, easy installation and reduced labor and material costs. Uniseal can withstand pressure, greases, acids, gasoline, waste, and suction, oils, sewage, heat and cold. Hydro flow uniseal is ideal for creating a secure seal in seconds for your reservoir or hydroponic system using PVC hard pipe or fittings.

When the pipe is pushed through the rubber-like Uniseal from the outside, the inside Alcryn wall becomes thin enough to allow the pipe to squeeze through and then forms a liquid-tight seal. It was designed to solve many of the issues of pipe to tank connections. Pipe od -. 84" 21mm. Then the pipe is coated with a slippery detergent i.

1/2" UNISEAL Flexible Tank Adapter Bulkhead - 2 Pack - E. Pipe od - 1. 315'' 33mm. Holesaw size: 1 1/4'' 32mm. Up to 3/8" wall Thickness. Uniseal is simply the world's best seal and installing the Uniseal is a simple process.

More information about The Uniseal Warehouse


Similar products



2 Pack - 2" UNISEAL Flexible Tank Adapter Bulkhead


The Uniseal Warehouse - Holesaw size: 1 1/4'' 32mm. For many industries pipe to tank seals are traditionally among the most complex connections to manufacture. Pipe od -. 84" 21mm. Made in the USA. It offers long life, easy installation and reduced labor and material costs. 9mm. 9mm. Uniseal is simply the world's best seal and installing the Uniseal is a simple process.

Uniseal flexible Tank Adapter bulkhead. For 1" pipe with an OD of 1. 315". Traditional seals require multiple parts such as, washers, o-rings, rigid flanges, bolts, along with long assembly times and high production costs. Pipe od - 1. 90" 48mm. The coefficient of friction with the plastic pipe is roughly three times higher than any other material which allows it to create a better seal than with any other material.

2 Pack - 2" UNISEAL Flexible Tank Adapter Bulkhead - The du pont alcryn is the key to the liquid-tight seal. In static conditions the seal is good up to 65 PSI. Hydro flow uniseal is ideal for creating a secure seal in seconds for your reservoir or hydroponic system using PVC hard pipe or fittings. Uniseal flexible Tank Adapter bulkhead. For 2" pipe with an OD of 2.

More information about The Uniseal Warehouse


Similar products



4 Pack - 3/4" Slip X Slip Bulkhead AM BRAND


Encompass All - Heavy duty bulkhead is molded of highest impact resistant PVC eliminating possibility of finding hid. 9mm. Pipe od -. 84" 21mm. Holesaw size: 1 1/4'' 32mm. Manufactured with precision for smooth tightening. Holesaw size: 2. 5" 63mm. All kits contain: bulkhead fitting, gasket, lock nut. Pipe od - 1. 90" 48mm. Up to 3/8" wall Thickness.

Pipe id - 1/2'' 13mm. Holesaw size: 3" 76mm. 9mm. Pipe id - 2" 50mm. 9mm. Pipe id - 1. 5" 38mm. Made in the USA. Pipe od - 1. 315'' 33mm. Made in the USA. Holesaw size: 1. 75'' 44mm. 1" 1/2" hole diameter required. Made in the USA.

More information about Encompass All


Similar products



3/4" Threaded X Threaded Bulkhead AM BRAND - 4 Pack


Encompass All - Pipe od -. 84" 21mm. All kits contain: bulkhead fitting, gasket, lock nut. Manufactured with precision for smooth tightening. 9mm. Made in the USA. Holesaw size: 3" 76mm. Pipe id - 1/2'' 13mm. Pipe od - 2. 375 60mm. Uniseal flexible Tank Adapter bulkhead. For 1" pipe with an OD of 1. 315". Up to 3/8" wall Thickness. 9mm. Made in the USA.

Made in the USA. Made in the USA. Holesaw size: 2. 5" 63mm. 9mm. Pipe od - 1. 90" 48mm. Pipe id - 2" 50mm. 4 pack threaded x threaded 3/4" Bulkhead. For aquariums and filtration sumps. 1" 1/2" hole diameter required. Uniseal flexible Tank Adapter bulkhead. For 2" pipe with an OD of 2. 375".

More information about Encompass All


Similar products