Luxfer 20 LB CO2 Aluminum Cylinder Tank CGA 320 Valve


Homebrewers Outpost D1052 - 320 valves are approved by the Compressed Gas Association CGA and have a male thread for CO2 regulators. This new 20lb aluminum cO2 cylinder is great for home beverage carbonation or any application that uses carbon dioxide. Aluminum tanks will not rust as steel tanks do over time. It holds 20 pounds of liquid CO2 and is refillable.

Includes durable carry handle to make transportation easier. Federal law requires that the tank ship unfilled. The tank is stamped with these markings. This tank has 1800 PSI service pressure. Made from high quality aluminum to ensure durability. It ships fast from our stock. Once filled this tank will be able to dispense 20-25 beer kegs.

Luxfer 20 LB CO2 Aluminum Cylinder Tank CGA 320 Valve - Also includes new brass CGA 320 CO2 valve. This package includes a durable carry handle for the tank, as well as a new brass CGA 320 valve. Certified for use in the u. S. Dot and Canada T. C.

More information about Homebrewers Outpost D1052

Day and Night CO2 Monitor and Controller for Greenhouses


CO2Meter - When the maximum level is reached, the power is turned off. The controller has a built-in photo sensor that shuts off the CO2 when it senses darkness. Simply mount it inside your greenhouse, all cables and hardware included, plug it into a standard wall jack, plug in your CO2 generator or regulator and it is ready to maximize your plant growing yields.

. The photo sensor control saves dollars and energy by insuring you'll only be supplying CO2 during the light cycle when it is needed. Best of all, this co2 Monitor & Controller is easy to install and use. The day and night co2 monitor and Controller is designed for greenhouses or grow rooms where elevated carbon dioxide levels are used to maximize plant growth.

Day and Night CO2 Monitor and Controller for Greenhouses - When co2 is too low, power is supplied to a CO2 generator or regulator not included via the built-in 110-240VAC 5A piggyback power cord. It lets you set the desired CO2 level. Controls cO2 in greenhouses or growrooms. Built-in light sensor allows CO2 enrichment only during daylight hours. Piggy back plug allows for control of CO2 generator or regulator sold separately.

User can set desired CO2 level for different plants. Easiest co2 controller to use in the industry.

More information about CO2Meter


Similar products



Genie Hoist, GH-3.8, Portable Lift, 300 lbs Load Capacity, Lift Height 12' CO2 Tank Sold Separately


Genie Industries GH-3.8 - Portable and compact lift can hoist up to 300 lbs. Genie is headquartered in Redmond, WA, booms, light towers, and manufactures a variety of lifts, and telehandlers. The lift has a one-piece platform with a weight capacity of 300 lbs 136 kg, which screws directly onto an auto-lubricating lifting cylinder, for smooth up and down movement.

Safety features, and pistol-grip controlTo ensure the lift stays in place while in use, 16' Hose, it has wheel brakes and leg locks for safety. Patented pistol-grip control handle for ease of use. For industrial use only. About genie industriesgenie industries, a subsidiary of Terex Corporation, was founded in 1966 with the introduction of the Genie Hoist, a portable pneumatic material lift.

Genie Hoist, GH-3.8, Portable Lift, 300 lbs Load Capacity, Lift Height 12' CO2 Tank Sold Separately - Hoist can be powered by co2 or compressed air for convenience Patented pistol-grip control handle for ease of use Auto-lubricating oil reservoir on each piston inside cylinder for a smooth lift The Genie GH-3. 8 super hoist material lift is a compressed air- or CO2-powered lift with a portable and compact design for lifting, positioning, and installing heavy items.

View detailed PDF. Platform dimensions are 1' 7"/. 48 m l x 2'/. 61 m w and the base measures 4' 5"/1. 35 m corner to corner.

More information about Genie Industries GH-3.8


Similar products



Titan Controls Carbon Dioxide CO2 Rain System w/ 25 ft Tubing


Sunlight Supply Inc. 702711 - Includes 25 feet of laser drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic t fitting and instructions. Made of high quality materials. Patented pistol-grip control handle for ease of use. Extendable via 100 foot additional tubing. Additional 100 feet roll of tubing is also available. This co2 rain system includes 25 feet of laser drilled 1/8 inch tubing, 6 eye hooks, 1/8 in plastic t fitting and instructions.

Auto-lubricating oil reservoir on each piston inside cylinder for a smooth lift. Effective and efficient co2 enrichment. Showers plants with co2. Maximum lifting height of 12' 5. 6" 3. 80 m, with a load capacity of 300 lbs 136 kg for safely lifting items. The co2 tank is sold separately See ASIN B00QVH6FHI. Hoist can be powered by co2 or compressed air for convenience.

Titan Controls Carbon Dioxide CO2 Rain System w/ 25 ft Tubing - Controls cO2 in greenhouses or growrooms. Built-in light sensor allows CO2 enrichment only during daylight hours. Piggy back plug allows for control of CO2 generator or regulator sold separately. User can set desired CO2 level for different plants.

More information about Sunlight Supply Inc. 702711


Similar products



Titan Controls Carbon Dioxide CO2 Regulator for 120V Controllers & Timers


Sunlight Supply Inc. 702710 - Features heavy-duty solenoid valve. Compatible with titan Controls CO2 Controller or other 120 volt controllers and timers. Effective and efficient co2 enrichment. Controls cO2 in greenhouses or growrooms. Built-in light sensor allows CO2 enrichment only during daylight hours. Piggy back plug allows for control of CO2 generator or regulator sold separately.

User can set desired CO2 level for different plants. Easiest co2 controller to use in the industry. Material lift for construction, maintenance, and installation. High quality oil-less pressure gauge. Includes 25 feet of laser drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic t fitting and instructions. Precision accuracy flow meter - 0

Titan Controls Carbon Dioxide CO2 Regulator for 120V Controllers & Timers - 5 to 15 scF/hour. Features heavy-duty solenoid valve. The co2 tank is sold separately See ASIN B00QVH6FHI. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Made of high quality materials. 1 amp/120 volts/60Hz. Compatible with titan controls CO2 Controllers or other 120 Volt controllers and timers.

More information about Sunlight Supply Inc. 702710


Similar products



New 20 lb Aluminum CO2 Cylinder with Handle and New CGA320 Valve


Luxfer - If you have any questions about this item, please feel to email us or contact us. Features heavy-duty solenoid valve. Hoist can be powered by co2 or compressed air for convenience. Aluminum carbon dioxide Cylinder with CGA 320 valve installed and carry handle/valve protector. 20 pound lb capacity, Shipped empty.

1800 psi, dot-3al and tc-3alm designed, high strength aluminum alloy 6061-T6. 8. 0 inch diameter, 28. 2 inch length, 1. 125" unf inlet thread. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Precision accuracy flow meter - 05 to 15 scF/hour. Made of high quality materials. The co2 tank is sold separately See ASIN B00QVH6FHI.

New 20 lb Aluminum CO2 Cylinder with Handle and New CGA320 Valve - Auto-lubricating oil reservoir on each piston inside cylinder for a smooth lift. Maximum lifting height of 12' 5. 6" 3. 80 m, with a load capacity of 300 lbs 136 kg for safely lifting items.

More information about Luxfer


Similar products



MANATEE Co2 Regulator Hydroponics Emitter System with Solenoid Valve Accurate and Easy to Adjust Flow Meter Brass - Shorten up and Double Your Time for Harvesting


MANATEE - Precision accuracy flow meter - 05 to 15 scF/hour. Designed for: indoor gardening, grow rooms and green houses to enhance carbon dioxide to the growing environment. Hoist can be powered by co2 or compressed air for convenience. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Effective and efficient co2 enrichment.

Extendable via 100 foot additional tubing. High quality oil-less pressure gauge. Controls cO2 in greenhouses or growrooms. Built-in light sensor allows CO2 enrichment only during daylight hours. Piggy back plug allows for control of CO2 generator or regulator sold separately. User can set desired CO2 level for different plants.

MANATEE Co2 Regulator Hydroponics Emitter System with Solenoid Valve Accurate and Easy to Adjust Flow Meter Brass - Shorten up and Double Your Time for Harvesting - Easiest co2 controller to use in the industry. Material lift for construction, maintenance, and installation. Patented pistol-grip control handle for ease of use. Volts : 110 volts standard u. S. A electric power : plastic tUBING : 5 Meter Long. Auto-lubricating oil reservoir on each piston inside cylinder for a smooth lift.

More information about MANATEE


Similar products



Accuflex Red PVC Tubing, 5/16in ID x 10ft


Accuflex CPHR516X10 - Ideal for CO2 supply lines. Features heavy-duty solenoid valve. Includes 25 feet of laser drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic t fitting and instructions. Will allow you to maintain ideal CO2 levels for optimum growth. Increase the plant metabolic rate: Speeding up growth rates and yields by up to 40%.

Low density pvc tubing offers the best combination of low taste and odor transfer and resistance to stress cracking. Sold per 10 foot length. Specifications:inside diameter: 5/16in 8mmoutside diameter: 9/16in 14mmmaximum working pressure at 70F: 60PSIMaximum Working Pressure at 122F: 20PSIWall Thickness: 1/8in 3mmModel: Bevlex Series 204 Controls cO2 in greenhouses or growrooms.

Accuflex Red PVC Tubing, 5/16in ID x 10ft - Built-in light sensor allows CO2 enrichment only during daylight hours. Piggy back plug allows for control of CO2 generator or regulator sold separately. User can set desired CO2 level for different plants. Easiest co2 controller to use in the industry. Material lift for construction, maintenance, and installation.

Hoist can be powered by co2 or compressed air for convenience. Compatible with titan Controls CO2 Controller or other 120 volt controllers and timers.

More information about Accuflex CPHR516X10


Similar products



Kegco KC LH-542 Draft Beer Regulator, Chrome


Kegco KC LH-542 - The kegco 542 pro series works with any co2 tank with a CGA-320 valve and measures psi, as well as the volume of the CO2 gas in the cylinder. Ideal for CO2 supply lines. Volts : 110 volts standard u. S. A electric power : plastic tUBING : 5 Meter Long. Both gauges feature an easy to read design. Patented pistol-grip control handle for ease of use.

The top gauge lets you know how much CO2 pressure is in the keg and displays 0-60 psi. Will allow you to maintain ideal CO2 levels for optimum growth. Increase the plant metabolic rate: Speeding up growth rates and yields by up to 40%. Showers plants with co2. Precision accuracy flow meter - 05 to 15 scF/hour.

Kegco KC LH-542 Draft Beer Regulator, Chrome - Includes two plastic tank washers and 12 ft of CO2 dispensing line. Aluminum carbon dioxide Cylinder with CGA 320 valve installed and carry handle/valve protector. 20 pound lb capacity, Shipped empty. 1800 psi, dot-3al and tc-3alm designed, high strength aluminum alloy 6061-T6. 8. 0 inch diameter, 28.

More information about Kegco KC LH-542


Similar products



5/16" Gas Line Assembly - Ball Lock


Home Brew Stuff RKTCH-PN-29574256 - The ball lock gas line assembly includes a ball lock gas "in" quick disconnect, 3' of 5/16" ID beverage tubing, two hose clamps and 5/16" barbed swivel nuts on either end of the tubing. Nsf listed red, food-grade & flexible tubing. Auto-lubricating oil reservoir on each piston inside cylinder for a smooth lift.

Clamp the open end to the gas "out" of your regulator or CO2 manifold, hook up the ball lock quick disconnect fitting to your Cornelius keg, and you're ready to impart intense carbonation on any ball lock keg. Made of high quality materials. 5/16 id x 9/16 od pvc tubing. Includes 25 feet of laser drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic t fitting and instructions.

5/16" Gas Line Assembly - Ball Lock - The co2 tank is sold separately See ASIN B00QVH6FHI. Ball lock gas in quick disconnect,. Dual gauge regulator shows you working pressure and tank pressure. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Will allow you to maintain ideal CO2 levels for optimum growth. Increase the plant metabolic rate: Speeding up growth rates and yields by up to 40%.

Hoist can be powered by co2 or compressed air for convenience. High quality oil-less pressure gauge.

More information about Home Brew Stuff RKTCH-PN-29574256


Similar products



VIVOSUN Hydroponics CO2 Regulator Emitter System with Solenoid Valve Flowmeter for Grow Room Grow Tent Green House Aquarium


VIVOSUN - Patented pistol-grip control handle for ease of use. 2 hose clamps and 5/16 inch. Be sure to turn the co2 tank valve to "OFF" when attaching or detaching the CO2 regulator. 3' of 5/16 inch,. Extendable via 100 foot additional tubing. Hoist can be powered by co2 or compressed air for convenience. Beware of cheap imitation! Only Beverage factory sells this regulator with the Kegco.

Co2 regulators attach to the co2 tank - be sure to place the CO2 tank on a flat surface and secure it to a wall or solid frame to insure it does not fall over. Ball lock gas in quick disconnect,. Maximum lifting height of 12' 5. 6" 3. 80 m, with a load capacity of 300 lbs 136 kg for safely lifting items. Do not exceed 2500 ppm, high levels can be harmful to people and animals.

VIVOSUN Hydroponics CO2 Regulator Emitter System with Solenoid Valve Flowmeter for Grow Room Grow Tent Green House Aquarium - Parameters: flowmeter: 0-15 scfh inlet connection: cga-320Plastic Tubing: 5 Meters Hose tail: suit for 4. 2 mm inside diameter hose Solenoid valve 1. 58" high pressure gauge volts: 110 Volts USA standard plug Controls cO2 in greenhouses or growrooms. Built-in light sensor allows CO2 enrichment only during daylight hours.

Piggy back plug allows for control of CO2 generator or regulator sold separately.

More information about VIVOSUN


Similar products