Lyman 7991360 Tool Kit 45 Piece


Lyman Products 7991360 - The set is packed in a compact, convenient storage case. The specialty bits include a weaver scope ring bit, 1911 grip Bushing bit, Glock front sight bit, as well as.062",. 093" and. 118" pin punches. The set also includes a ratchet wrench so the maximum torque can be applied to those tough-to-remove screws. The bits for slotted screws are hollow ground, so they properly fit screw slots and prevent cam-out which creates ugly, damaged screw slots.

This complete set comes with bits for slotted screws, hex screws, 6-lobe screws, and Phillips screws; in addition to an assortment of specialty bits. Comes with bits for slotted screws, 6-lobe screws, Hex screws, and Phillips screws. Includes a weaver scope ring bit, as well as. 062", 1911 grip bushing bit, Glock front sight bit, .

Lyman 7991360 Tool Kit 45 Piece - 093" and. 118" pin punches. Provides all the bits needed by gunsmiths and all those who work on firearms. Pachmayr's screwdriver set provides all the bits needed by gunsmiths and all those who work on firearms.

More information about Lyman Products 7991360

Wheeler Engineering Hammer and Punch Set with Brass, Steel, Plastic Punches, Brass/Polymer Hammer and Storage Case for Gunsmithing Maintenance


Sportsman Supply Inc. 951900 - Dimensions: 9. 75" l x 5. 25" w x 2" D. Be prepared: features brass, steel and nylon solid punches making it the ideal kit for your workbench. Non-destructive: chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use. It makes a great tool for driving pins, drifting sights, at the shooting range or on your workbench.

Includes: 1/8", 9/32" and 5/16" brass punches, 7/32", 2 3/32" steel punches, 1/4", 3/16", 2 1/16", 15/64", 5/32", 9/64", 3/8" plastic punches. Storage: comes with a convenient plastic molded storage case. The wheeler hammer and punch Set includes a polymer/brass combination hammer, eight precision brass punches, four steel punches and two plastic punches.

Wheeler Engineering Hammer and Punch Set with Brass, Steel, Plastic Punches, Brass/Polymer Hammer and Storage Case for Gunsmithing Maintenance - Includes a convenient carry case that securely holds all components.

More information about Sportsman Supply Inc. 951900


Similar products



Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block


Real Avid AVSBBLK Smart Bench Block - Capture pins underneath the block: after pins are punched the outer ring prevents pins from rolling away. And inside the block is a magnet that grabs dropped pins. Dimensions: 9. 75" l x 5. 25" w x 2" D. Be prepared: features brass, steel and nylon solid punches making it the ideal kit for your workbench. Specs: diameter: 3 3/4"; thickness: 1 ¼ directions for Using the Magnet: The magnet is on the interior edge of the Smart Bench Block.

Includes: 1/8", 7/32", 9/32" and 5/16" brass punches, 2 1/16", 2 3/32" steel punches, 15/64", 5/32", 9/64", 3/16", 1/4", 3/8" plastic punches. Storage: comes with a convenient plastic molded storage case. Perfect for: gunsmiths of all skill ranges; Gun owners who are looking to do more detailed work; Gun enthusiasts who are looking to work on all types of guns.

Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block - Made from engineering-grade resin, this block won’t mar or damage your favorite guns and the outside rubber liner keeps the block from sliding on any surface when driving pins. The universal smart bench block is a tool that any gun owner looking to do minor to major work on their firearm will be happy to have.

So intelligently designed, you’ll feel smarter just using it. Remove government 1911 bushings: an imbedded 1911 Government Bushing Wrench is included on the backside of the block this wrench makes removing bushings easy. Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms.

More information about Real Avid AVSBBLK Smart Bench Block


Similar products



Pachmayr 03054 Screw Kit, 277Piece, Firearm Screw Kit


Pro-Motion Distributing - Direct 03054 - 24-compartment plastic case. Remove government 1911 bushings: an imbedded 1911 Government Bushing Wrench is included on the backside of the block this wrench makes removing bushings easy. Non-destructive: chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use.

All are commonly used for firearms and scopes. Set also includes tweezers for easy selection. A steady and stable work surface: the non-slip outer ring steadies the block during use and the inner groove keeps barrels stable during detailed work. Capture pins underneath the block: after pins are punched the outer ring prevents pins from rolling away.

Pachmayr 03054 Screw Kit, 277Piece, Firearm Screw Kit - Includes: 1/8", 7/32", 15/64", 2 3/32" steel punches, 9/64", 1/4", 9/32" and 5/16" brass punches, 5/32", 2 1/16", 3/16", 3/8" plastic punches. Storage: comes with a convenient plastic molded storage case. Scratch resistant material: the engineering-grade resin won't mar or damage your favorite guns. Commonly used for firearms and scopes.

Dimensions: 9. 75" l x 5. 25" w x 2" D. Tweezers for easy selection.

More information about Pro-Motion Distributing - Direct 03054


Similar products



Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance


Wheeler 553556 - Accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%. Scratch resistant material: the engineering-grade resin won't mar or damage your favorite guns. Wheeler's fat wrench brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, guard screws and other screws, accurate torque settings to scope rings, which aids in accuracy and decreases the opportunity for problems in the field.

Tweezers for easy selection. 24-compartment plastic case. Includes: 1/8", 1/4", 7/32", 9/64", 3/16", 5/32", 15/64", 2 1/16", 9/32" and 5/16" brass punches, 2 3/32" steel punches, 3/8" plastic punches. Storage: comes with a convenient plastic molded storage case. Ease of use: apply, guard screws, repeatable, windage screws and base screws, accurate torque settings to scope rings, which aids in accuracy and decreases the opportunity for problems in the field.

Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance - Reliable: torque adjustment range from 10 in/lbs to 65 in/lbs. Together, they can ensure accurate tightening of most every screw on any gun in your collection. Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C". Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms.

A steady and stable work surface: the non-slip outer ring steadies the block during use and the inner groove keeps barrels stable during detailed work.

More information about Wheeler 553556


Similar products



Wheeler Engineering Level Level Level Scope Mounting Leveling Tool with Magnetic Base and Adaptable Design for Scope Mounting, Gunsmithing and Maintenance


Sportsman Supply Inc. 113088 - Scratch resistant material: the engineering-grade resin won't mar or damage your favorite guns. A steady and stable work surface: the non-slip outer ring steadies the block during use and the inner groove keeps barrels stable during detailed work. Compact: small size allows for convenient storage and transport.

Then level the scope, tighten the rings, and the job is done. The simplest, most accurate scope leveling system ever devised. Crooked crosshairs cause your scope adjustments to be unreliable, and even make zeroing your rifle a frustrating and costly experience. The makers of some scope leveling devices tell you that leveling your scope to the top of the base produces a level scope.

Wheeler Engineering Level Level Level Scope Mounting Leveling Tool with Magnetic Base and Adaptable Design for Scope Mounting, Gunsmithing and Maintenance - 24-compartment plastic case. Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms. Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down. The magnetic base in the rifle level bridges the bolt raceway, allowing you to position your rifle perfectly level.

Commonly used for firearms and scopes. Be prepared: features brass, steel and nylon solid punches making it the ideal kit for your workbench. Versatility: works with practically any bolt action rifle and can be adapted to work with other rifle designs.

More information about Sportsman Supply Inc. 113088


Similar products



Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance


Battenfeld 181181 - The vise was designed to accommodate the widest possible array of firearms for cleaning, maintenance or gunsmithing, and works on several varieties of guns. Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.

Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C". Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down. Scratch resistant material: the engineering-grade resin won't mar or damage your favorite guns.

Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance - Tweezers for easy selection. Be prepared: features brass, steel and nylon solid punches making it the ideal kit for your workbench. Tipton’s best gun vise is the best tool you can own for working on your guns. Convenient: flat and round bottom compartments hold bottles, screws and parts. Remove government 1911 bushings: an imbedded 1911 Government Bushing Wrench is included on the backside of the block this wrench makes removing bushings easy.

Durable: non-marring, solvent-resistant polymer stands up to years of hard use. Compact: small size allows for convenient storage and transport.

More information about Battenfeld 181181


Similar products



Wheeler Universal Bench Block with Non-Marring Construction and Multiple Uses for Pistols, Gunsmithing and Maintenance


Green Supply 672215 - Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects. Ease of use: two-sided tool features all channels and holes needed to add or remove parts from most handguns.

1-5/16" high, 4" in diameter. Capture pins underneath the block: after pins are punched the outer ring prevents pins from rolling away. Scratch resistant material: the engineering-grade resin won't mar or damage your favorite guns. Commonly used for firearms and scopes. Versatility: works perfectly for assembling and disassembling 1911s as well as 10/22s.

Wheeler Universal Bench Block with Non-Marring Construction and Multiple Uses for Pistols, Gunsmithing and Maintenance - Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms. Non-destructive: Constructed of non-marring urethane. Versatility: works with practically any bolt action rifle and can be adapted to work with other rifle designs. Accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%.

Non-marring urethane for long use. Non-destructive: chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use. Durable: non-marring, solvent-resistant polymer stands up to years of hard use.

More information about Green Supply 672215


Similar products



Marketty Gunsmithing Hammer with 4 Tips by Militaria


Marketty XMS1425 - Brass face can be used for driving pins and punches. Capture pins underneath the block: after pins are punched the outer ring prevents pins from rolling away. Dimensions: 1 1/4" H x 4" Diameter. Versatility: works perfectly for assembling and disassembling 1911s as well as 10/22s. Includes 4 tips. Includes: 1/8", 2 1/16", 15/64", 3/16", 2 3/32" steel punches, 9/32" and 5/16" brass punches, 9/64", 7/32", 1/4", 5/32", 3/8" plastic punches.

Storage: comes with a convenient plastic molded storage case. Includes: features a main spring removal recess, rear sight drift channel, hammer and sear pin removal holes, front sight stalking channel, barrel link removal V channel, ejector port dressing channel and a rail dressing round bottom channel.

Marketty Gunsmithing Hammer with 4 Tips by Militaria - Nylon face is non-marring and great for alignment. Be prepared: features brass, steel and nylon solid punches making it the ideal kit for your workbench. Dimensions: 9. 75" l x 5. 25" w x 2" D. Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.

Non-destructive: Constructed of non-marring urethane.

More information about Marketty XMS1425


Similar products



Wheeler 710909 Digital Firearms Accurizing Torque Wrench


Battenfeld Technologies 710909 - Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down. Compact: small size allows for convenient storage and transport. Will aid in accuracy of all your screws and decreases the opportunity for problems in the field.

Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks. Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C". Capture pins underneath the block: after pins are punched the outer ring prevents pins from rolling away.

Wheeler 710909 Digital Firearms Accurizing Torque Wrench - Range. Includes: a magnetized Action Level and a non-magnetized Scope Turret Level. Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms. Brass face can be used for driving pins and punches. Large lcd digital display for ease of viewing. Accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%.

Non-destructive: chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use. Includes: 1/8", 9/32" and 5/16" brass punches, 3/16", 2 3/32" steel punches, 9/64", 1/4", 7/32", 5/32", 2 1/16", 15/64", 3/8" plastic punches.

More information about Battenfeld Technologies 710909


Similar products



SPIKA Gunsmithing Tools Gun-Care Hammer and Brass Punch Set Gunsmith Punches Set Tool Accessories


SPIKA - Remove government 1911 bushings: an imbedded 1911 Government Bushing Wrench is included on the backside of the block this wrench makes removing bushings easy. Ease of use: two-sided tool features all channels and holes needed to add or remove parts from most handguns. Dimensions: 9. 75" l x 5. 25" w x 2" D. Injection molded storage case.

24-compartment plastic case. Includes: 10 bits hex to square adapter, #32 flat blade, #11 flat blade, #10 flat blade, 5/32 hex, t20 torx, 7/64 hex, 3/32 hex, T15 torx and Leupold specialty flat blade, ¼" socket and a convenient plastic storage case. Accuracy: ensure crosshairs are aligned for in line shot placement and reliable doping adjustments.

SPIKA Gunsmithing Tools Gun-Care Hammer and Brass Punch Set Gunsmith Punches Set Tool Accessories - 8pcs brass punches:1/8", 1/4", 5/16", 9/64", 9/32", 3/16", 2×7/32".4pcs steel punches:2each of 1/16" and 3/32". Durable: non-marring, solvent-resistant polymer stands up to years of hard use. Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks.

Compact: small size allows for convenient storage and transport. Versatility: works with practically any bolt action rifle and can be adapted to work with other rifle designs. Includes: a magnetized Action Level and a non-magnetized Scope Turret Level.

More information about SPIKA


Similar products