As an Amazon Associate I earn from qualifying purchases.
P>remote control: the supporting remote control with 2. 4g hz wireless channel can control shooting at a maximum distance up to 100 meters. P>power supply: 1 or 2 packs sony np-fw50 lithium batteries are recommended to extend shooting time Battery is not included.
4 g wireless remote control allows to set delay time, time interval and number of shots. P>compatibility: the battery grip is compatible with sony a6300 a6000 a6400 cameras; 1/4-inch screw hole at the bottom allows you to mount the grip on a tripod; Provides more battery capacity for your camera, effectively extending your shooting time.



It would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. Featured recommendationsfor better setup, optional cable clamp 1822(for a6300/a6500)and cable clamp 1693 for a6000 allows to protect the HDMI cable. Mutiple moutingsthis cage comes with multiple mounting points, built-in screw driver, cold shoe, nato rail, allow you to attach more accessories, like SMALLRIG Articulating Arm 2070, such as 1/4’’ & 3/8’’ threaded holes, and 3/8’’ locating holes for ARRI standard, monitor mount 1842, etc.
Perfect protectionsecure tightly via the 1/4’’ screw on the bottom and the m2. 5 screw on the right side, greatly prevent from twistingPlease note that A6000 only could be locked via the bottom 1/4’’ screw. Attach a rod clamp 1941 to provide a 15mm rail support at 85mm rod height for mounting the matte box, SMALLRIG lens support 2152, SMALLRIG 15mm Rod 1053 for shoulder support system, etc. And the rubber pads on the bottom protect your camera from scratching.

When using two batteries, the grip will automatically switch to the second battery if the first becomes depleted. Switching does not interrupt camera operation.

Remaining power indicator, the same function as the original grip. With a usb charge port, convenient for you to charge with micro USB cable 5V/≥1.



5a for charging battery inside on the grip, doubling the battery capacity for more shooting time. Note: battery grip only, not including the battery and camera. Buttons and controls are conveniently placed and easy to reach for greater comfort, allowing you to have an extra source of power for longer shooting sessions.

1. Neewer
#ad
Works with 1 or 2 NP-FW50 Battery, 2.4 G Wireless Remote Control Included Battery Not Included, Neewer 2.4G Vertical Battery Grip Compatible with Sony A6300 A6000 A6400 Cameras
#adNeewer #ad - P>personilized design: vertical shutter release button is convenient to operate; Ergonomic design coupled with premium coating made of premium plastic provides comfortable holding experience and excellent stability.P>remote control: the supporting remote control with 2. 4g hz wireless channel can control shooting at a maximum distance up to 100 meters. P>power supply: 1 or 2 packs sony np-fw50 lithium batteries are recommended to extend shooting time Battery is not included.
More information #ad
P>multi-function: professional battery grip with a shutter release button, exposure time, 2. 4 g wireless remote control allows to set delay time, time interval and number of shots. P>compatibility: the battery grip is compatible with sony a6300 a6000 a6400 cameras; 1/4-inch screw hole at the bottom allows you to mount the grip on a tripod; Provides more battery capacity for your camera, effectively extending your shooting time.
Brand | Neewer #ad |
Manufacturer | NEEWER #ad |
Part Number | 10096972 |
Model | 10096972 |
More information #ad
2. Meike
#ad
Meike MK-A6300 Vertical Shooting Grip Power Pack Holder for Sony A6300 A6000 Camera
#adMeike #ad - It is equipped with wired controlled shutter release button for shooting in a vertical position. It is the best choice for portrait photographs. Sealing technique prevents water and dust into battery grip. The mk-a6300 battery pack is compatible with Sony A6000 and A6300, offers you the same control experience as horizontal shooting.More information #ad
The balance of body, it is not easy to poured forward when you load the Metco handle even wearing a telephoto lens. This battery grip can hold one or two NP-FW50 rechargeable Li-lion batteries battery not included, extending your shooting time.Brand | Meike #ad |
Manufacturer | Meike #ad |
Height | 2.13 Inches |
Length | 6.1 Inches |
Weight | 0.45 Kilograms |
Width | 3.03 Inches |
Part Number | MK-A6300 |
Model | MK-A6300 |
More information #ad
3. MEKE
#ad
Meike MK-A6300 PRO Built-in 2.4GHZ Remote Controller Up to 100M to Control Shooting for Sony A6100 A6400 A6300 A6000 Camera
#adMEKE #ad - The max distance for remote control can reach to about 100m;Working voltage: 7. 2v-8. 4v for grip / 3v for remote control;Working current: less than 51mA for remote control.More information #ad
Adopts 2. 4ghz wireless channel and fsk signal mode. 2pcs np-fw51 lithium batteries can be put into the grip, extending your shooting time. Works with sony alpha a6100 a6400 a6300 a6000 ; you can turn off the camera by turning MK-A6301 battery grip off.Brand | MEKE #ad |
Manufacturer | HK Meike #ad |
Height | 1.46 Inches |
Length | 1.4 Inches |
Weight | 0.44 Pounds |
Width | 2.56 Inches |
Part Number | MK-BG-A6300 Pro |
Model | MK-A6300 Pro |
More information #ad
4. SMALLRIG
#ad
SMALLRIG Cage for Sony A6000/A6300/A6500 with MK-A6300/A6500 Battery Grip for Meike, 2268
#adSMALLRIG #ad - Bottom setupintegrate with an arca-type compatible dovetail plate on the bottomfeatures built-in screw driver for quick release your cage. Note: the item only includes the cage, doed not have the battery grip. ). You can also mount the rod clamp 1943 with the 15mm rods to the front of the cage for 15mm LWS system.It would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. Featured recommendationsfor better setup, optional cable clamp 1822(for a6300/a6500)and cable clamp 1693 for a6000 allows to protect the HDMI cable. Mutiple moutingsthis cage comes with multiple mounting points, built-in screw driver, cold shoe, nato rail, allow you to attach more accessories, like SMALLRIG Articulating Arm 2070, such as 1/4’’ & 3/8’’ threaded holes, and 3/8’’ locating holes for ARRI standard, monitor mount 1842, etc.
More information #ad
High customizationthe cage is specially designed for sony a6000/a6300/a6500 and only compatible with meike mk-a6300/a6500 battery grip. Perfect protectionsecure tightly via the 1/4’’ screw on the bottom and the m2. 5 screw on the right side, greatly prevent from twistingPlease note that A6000 only could be locked via the bottom 1/4’’ screw. Attach a rod clamp 1941 to provide a 15mm rail support at 85mm rod height for mounting the matte box, SMALLRIG lens support 2152, SMALLRIG 15mm Rod 1053 for shoulder support system, etc. And the rubber pads on the bottom protect your camera from scratching.
Brand | SMALLRIG #ad |
Manufacturer | SMALLRIG #ad |
Height | 5.39 Inches |
Length | 5.43 Inches |
Width | 2.56 Inches |
Part Number | CCS2268-SR |
Model | CCS2268-SR |
More information #ad
5. DSTE
#ad
DSTE Replacement for Pro VG-6300 Vertical Battery Grip + 2X NP-FW50 Battery Compatible Sony A6300 A6000 Digital Camera
#adDSTE #ad - With a usb charge port, convenient for you to charge with micro USB cable 5V/≥1. 5a, the indicator light shows red when charging and shows green when fully charged.When using two batteries, the grip will automatically switch to the second battery if the first becomes depleted. Switching does not interrupt camera operation.
More information #ad
Buttons and controls are conveniently placed and easy to reach for greater comfort. Holds two Li-ion batteries for extended shooting. Li-ion battery info: dc 8. 4v max; dc 7. 2v mean 14. 4wh/1950mAh. A firm, comfortable grip for vertical-position shooting with the Camera.Brand | DSTE #ad |
Manufacturer | Dst Electron Technological Co., Ltd #ad |
Part Number | DB92B2 |
Model | DB92B2 |
More information #ad
6. DST
#ad
DSTE Replacement for Pro VG-6300 Vertical Battery Grip Compatible Sony A6300 A6000 Digital Camera as NP-FW50
#adDST #ad - Effectively double your shooting time with 2 NP-FW50 rechargeable Li-ion batteries. When using two batteries, the grip will automatically switch to the second battery if the first becomes depleted.Remaining power indicator, the same function as the original grip. With a usb charge port, convenient for you to charge with micro USB cable 5V/≥1.
More information #ad
5a, the indicator light shows red when charging and shows green when fully charged. Buttons and controls are conveniently placed and easy to reach for greater comfort. Switching does not interrupt camera operation. A firm, comfortable grip for vertical-position shooting with the Camera.Brand | DST #ad |
Manufacturer | DST Electron Technological Co., Ltd #ad |
Part Number | DB92-NEW |
Model | DB92-NEW |
More information #ad
7. Meike
#ad
Meike MK-A6300 Pro Vertical Shooting Battery Grip Power Pack with 100M 2.4G Hz Wireless Remote Control for Sony A6300 A6000 Camera
#adMeike #ad - This battery grip can hold one or two NP-FW50 rechargeable Li-lion batteries, extending your shooting time. Sealing technique prevents water and dust into battery grip. The mk-a6300 pro battery pack is compatible with Sony A6000 and A6300, offers you the same control experience as horizontal shooting.More information #ad
Using fsk 2. 4g wireless transmission input frequency, anti-jamming capability strong signal is more stable. The balance of body, it is not easy to poured forward when you load the Metco handle even wearing a telephoto lens. Transmission distance up to 100 meters.Brand | Meike #ad |
Manufacturer | Meike #ad |
Height | 2.13 Inches |
Length | 6.1 Inches |
Weight | 0.45 Kilograms |
Width | 3.03 Inches |
Part Number | MK-A6300 Pro |
Model | MK-A6300 Pro |
More information #ad
8. Koah
#ad
Koah Battery Grip for Sony a6000 and a6300
#adKoah #ad - Tripod: standard 1/4"-20 tripod socket. Compatibility: designed specifically for the Sony a6000 and a6300 Batteries: works with 1 or 2 Sony NP-FW50 li-ion batteries sold separately. Shooting: Provides power for extended shooting time. Versatility: Supports horizontal or vertical shooting.More information #ad
Brand | Koah #ad |
Manufacturer | Koah #ad |
Height | 5.3 Inches |
Length | 3.8 Inches |
Width | 6.4 Inches |
Part Number | KO-VG-6300 |
More information #ad
9. Newmowa
#ad
Newmowa VG-6300 Replacement Vertical Battery Grip for Sony A6000 A6300 A6400 Digital SLR Camera
#adNewmowa #ad - Same function on the grip as the camera, not affected any function of the original camera. Feature can hold 2 np-fw50 rechargeable li-ion batteries, mciro USB Port 5V/≧1.5a for charging battery inside on the grip, doubling the battery capacity for more shooting time. Note: battery grip only, not including the battery and camera. Buttons and controls are conveniently placed and easy to reach for greater comfort, allowing you to have an extra source of power for longer shooting sessions.
More information #ad
1 year warranty and 24 Hours friendly customer service. Feature a variety of operating control: shutter button and multi-function button. Work with sony a6000/a6300/a6400 digital slr camera, no slip and no gap, and feature a quality rubber grip for better camera handling. A firm, comfortable grip for vertical-position shooting with the camera.Brand | Newmowa #ad |
Manufacturer | Newmowa #ad |
Part Number | VG-6300-US |
More information #ad
10. Vivitar
#ad
Vivitar Deluxe Power Battery Grip for Sony Alpha A6000 & A6300 Camera with Wireless Remote
#adVivitar #ad - Detachable battery compartment. Includes a wireless IR remote and receiver. Securely attaches via the tripod mount on the bottom of the camera. Vertical shutter release button. Holds 2 np-fw50 batteries.More information #ad
Brand | Vivitar #ad |
Manufacturer | Vivitar #ad |
Height | 3.5 Inches |
Length | 6.25 Inches |
Weight | 0.6 Pounds |
Width | 5 Inches |
Part Number | VIV-PG-A6000 |
Model | VIV-PG-A6000 |
More information #ad