Top 10 Ball Head Hot Shoe Adapter – Cell Phone Tripods

As an Amazon Associate I earn from qualifying purchases.

1. Neewer

#ad

Neewer Cellphone Holder Clip Desktop Tripod Mount with Mini Ball Head Hot Shoe Adapter for 14-inch and 18-inch Ring Light and Smartphone Within 1.9-3.9 inches Width

#ad
Neewer #ad - Kit includes: 1 vertical bracket smartphone holder; 1 Mini Ball Head with Lock and Hot Shoe Adapter Camera Cradle; NOTE: Smartphone is NOT included. Mini ball head: this ball head adapter fits onto a standard accessory shoe and locks into position; Can be used to mount accessories onto a flash bracket.

360 degree rotatable: 360 degree rotation design is perfect for rotating your phone into portrait mode vertical or landscape mode horizontal without taking the phone out of the adapter. Easy adjustment: screw the 2 thumb screw knobs to adjust the phone clip's direction and width, easy to secure your phone into the mount without causing damage to your phone; Suitable for smartphones within 1.

9-3. 9 inches width. Detachable smartphone clip: mount smartphone to a tripod, selfie stick, video slider, stabilizer, monopod, ring light, handle grip with 1/4-inch thread; The Smartphone Holder is detachable to use alone with 1/4-inch screw tripod mount.
BrandNeewer #ad
ManufacturerNeewer #ad
Height2.83 Inches
Length4.92 Inches
Weight0.38 Pounds
Width2.01 Inches
Part Number90093338
Model90093338

2. SMALLRIG

#ad

SMALLRIG 1/4" Camera Hot Shoe Mount with Additional 1/4" Screw 2pcs Pack, 2059

#ad
SMALLRIG #ad - If you need one pcs pack, please see the SMALLRIG 761. Adjustable direction the ball head can be adjusted into most any position.

Mini ball head smallrig mini ball head mount 2059 is designed to attach the camera tightly via a cold shoe adapter, while the 1/4" screw could be mounted on the monitor in adjustable directions in different scenarios and could be locked via a wingnut. Package included the mini ball head mount 2059 is two pcs pack. Note the ball head maximum load: 3 kg. Compatibility the cold shoe adapter works for most cameras including Canon, Fujifilm, Olympus, Panasonic, Kodak, Pentax, Nikon, etc.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height1.38 Inches
Length2.36 Inches
Width0.98 Inches
Part Number2059-SR
Model4332041521

3. Neewer

#ad

Neewer 1/4” Camera Hot Shoe Mount with Additional 1/4” Screw 2-Pack, Microphone, Ring Light, ST17, Mini Ball Head Hot Shoe Mount Adapter for Cameras, Smart Phone, Camcorders, Video Light

#ad
Neewer #ad - Made of sturdy aluminum alloy and stainless steel, the lightweight mini ball head is sturdy, durable, and corrosion-resistant. The 1/4” screw allows you to mount a wide range of devices, field monitor, such as LED fill light, LED flash, and other accessories with a 1/4” threaded hole.

The adjustment knob tightly locks the ball joint. Package contents neewer mini ball head 2-Pack, Two Hex Keys, Two 1/4” Screws. Sturdy & durable the maximum load capacity is 3. 3lb/1. 5kg. Flexible positioning the ball head can be adjusted to almost any position, and it can be quickly locked with the adjustment knob. Mini ball head securely mount on your camera via the cold shoe adapter. Wide compatibility standard 1/4” hot shoe adapter is compatible with most digital SLR cameras, Olympus, Nikon, Canon, Panasonic, such as Sony, Pentax, Fujifilm, and more.
BrandNeewer #ad
ManufacturerNEEWER #ad
Weight0.35 Pounds
Part Number10100226
Model10100226

4. UTEBIT

#ad

UTEBIT 2 Pack Mini Ball Head with 1/4" Hot Shoe Mount Adapter 360 Degree Rotatable Aluminum Tripod Ball Head for Monopods DSLR Cameras HTC Vive Camcorder Light Stand,Max. Load 5.5lbs

#ad
UTEBIT #ad - Versatilitybottom: with 1/4" screw hole, widely applicate for camera, light stand, can be used with the removable 1/4" hot shoe adapter Package Includes Top:With 1/4" screw, flash light, tripod etc. Light weight & portableweight: 85g / pc; size:65 * 17 * 17mm / pc, small size and lightweight, easy to carry.

Package includes:2* mini ball head; 2* removable 1/4" hot shoe adapter. Max weight capacity2. 5kg weight capacity; material: plastic+metal; With rubber-padded mount on the top to protect your camera from potential scratches between your camera and the mounting part. You also can use the knob to adjust to the desired angle to meet your needs at different angles.

Note: this package not includ light stand. Multi-angle use360 degree panoramic rotation; 90 degree tilt rotation; Ball head diameter is about 23mm, and it can be fixed easily by locking knob for meeting different shooting angle. The combination of this mini ballhead and other light stands can be used as a Vive stand. With locking knob aiming and horizon leveling can be easily accomplished.
BrandUTEBIT #ad
ManufacturerUTEBIT #ad
Height1.4 Inches
Length3.3 Inches
Weight0.18 Pounds
Width2.2 Inches
Part NumberUTEBIT_MINI_BALLHEAD_2PACK
Model5823866114

5. MAEXUS

#ad

MAEXUS Hot Shoe Mount Adapter 1/4" Thread Mini Ball Head Ring Light Adapter for Cameras Camcorders Smartphone Microphone Gopro Canon LED Video Light Video Monitor Tripod Monopod 2 Pcs

#ad
MAEXUS #ad - If there is any doubt, please contact. Standard hot shoe adapter- the product has a standard 1/ 4" hot shoe adapter 072" * 072", panasonic, olympus, pentax, it will fit most Dslr cameras such as DSLR cameras Canon, Nikon, Fujifilm & Kodak.

Sturdy and durable- max load: 3. 5 lbs. It is lightweight but made of sturdy Aluminum Alloy and precise CNC process anodized aluminum materials, sturdy and durable, it won't be easy to suffer corrosion or breakage. We are committed to providing each customer with the highest standard of customer service. Integrity warranty- package includes: 2 x ball head mount. Flexible positioning- when you twist the locking knob control, so once you tighten the control, it can go to the exact position according to your needs by 360 degree rotation.

1/ 4" screw mount- use to mount accessories onto a flash bracket, and fits for most DSLR camera, flash light, camcorder, LED video light, tripod, LCD monitors and other accessories with 1/ 4" screw thread. The tightening wheel has threads cut in opposing directions, the ballhead will be locked without shaking and it won't move around.
BrandMAEXUS #ad
ManufacturerMAEXUS #ad
Height0.71 Inches
Length2.44 Inches
Width0.71 Inches
Part NumberRXYT-2
ModelEA0394BK

6. SHINEWEE

#ad

1/4" Screw and Cold Shoe Mount, 360 Degree Panning Base, Idea for Vlog Video Photograhpy, Ball Head with Cold Shoe Mount, 135 Degree Tilt, Come with on Camera Hot Shoe Adapter

#ad
SHINEWEE #ad - Side: cold shoe port, light stand, can be used with the removable 1/4" hot shoe adapter Package Includes ◢ Top:With 1/4" screw, flash light, can be switched to 1/4" male screw with included shoe adapter. High quality: precision machined from solid blocks of 6061-T6 aircraft-grade aluminum and enough long time anodized treatment for Corrosion-resistant and higher durability.

Versatility: ◢ bottom: with 1/4" screw hole mount, widely applicate for camera, tripod etc. Multi-fuctional: 360 degree panoramic rotation and swivel, 90 degree tilt rotation when pulling the ball tilt down into the notch, it can be fixed easily by one locking knob for meeting different shooting angle,◢ Locking knob position adjustable by pulling it outside.

Light weight & portable: weight: 2. 56oz / 54 mm base diameter: 1. 18" / 30 mm, small size and lightweight, easy to carry. Max load Capacity: 8. 8lbs / 73 g; Height: 2. 12" / 4 kg; material: 6061-T6 aluminum. Inovative design: designed a cold shoe mount on the side of the ball head, very convenient to attach accessories like microphone, led light on the side as you take photos or videos.
BrandSHINEWEE #ad
ManufacturerSHINEWEE #ad
Height2.12 Inches
Length1.18 Inches
Weight0.16 Pounds
Width1.18 Inches
Part NumberMBH-19
ModelMBH-19
Warranty2 year manufacture

7. UTEBIT

#ad

UTEBIT Ball Head with 1/4" Hotshoe Camera Mount Adapter 360 Degree Rotatable Aluminum Tripod Head for DSLR Cameras HTC Vive Tripods Monopods Camcorder Light Stand, Max. Load 6.6lbs

#ad
UTEBIT #ad - With rubber-padded mount on the top to protect your camera from potential scratches between your camera and the mounting part. 1/4 hot shoe Weight:6g. You also can use the knob to adjust to the desired angle to meet your needs at different angles.

This ball head set can be used for cameras, bottom with 1/4 '' female thread hole, or other camera devices and accessories with standard 1/4" thread hole which can be attached to the camera. Light weight & portableball head weight 137g, bottom diameter 30mm, height 60mm, ball dimmeter 20mm .360 degree swivel tripod head ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography when adjusting the angle.

Strong & durable & safemade of aluminum alloy, the max load is 3KG 6. 6lbs, very strong and durable. Packing includes: 1 x 360 degree ballhead; 1 x Removable 1/4 hot shoe interface adapter. With locking knob aiming and horizon leveling can be easily accomplished. Wide application rangtop with 1/4 '' male thread, come with a 1/4 hot shoe interface adapter Removable.
BrandUTEBIT #ad
ManufacturerUTEBIT #ad
Height0.79 Inches
Length2.2 Inches
Weight0.32 Pounds
Width2.2 Inches
Part NumberUTEBIT_PORT_360S_14HOTSHOE_SET
Model4332013945

8. UTEBIT

#ad

UTEBIT Double Ballhead Arm 360 Degree Rotation Magic Articulating Arm 1/4" Heavy Duty Friction Arms Mount Bracket with Flash Light Hot Shoe + Camera Fixing Screw Adapter for Camera DSLR Monitor Video

#ad
UTEBIT #ad - Small and portable, durable. Easy to use the multi-function double ball adapter only needs to tighten the middle knob, and all the ball heads of the connecting parts can be fixed at the same time. Strong versatility universal magic arm has a 1/4 screw structure on both sides, and it is easier to take the center of gravity, which can be fixed at a favorite position, and fix the monitor to the most suitable position.

360°rotating double ball head the 360-degree rotating double ball head design can meet your shooting needs at any angle. The powerful magic arm on the double ball head can be firmly fixed on the surveillance camera, microphone, flash, connected monitor, LED auxiliary light, stabilizer. The length: about 124mm about the length of a pen is only 019kg.

Durable and portable the magic arm holder is made of cnc-processed aluminum alloy and stainless steel, which has a good hand feeling. 5kg carrying capacity the carrying capacity can reach 5KG, and the large inner hole head is equipped with rubber, which can increase friction and make the equipment more stable, allowing you to confidently capture any details during the photography process. And an extra elastic knob is included for easy removal of photographic accessories.
BrandUTEBIT #ad
ManufacturerUTEBIT #ad
Weight0.21 Pounds
Part NumberUTEBIT_MAGICARM_SHOEBASE_SET_USA

9. FOTYRIG

#ad

Microphone, 1/4" Mini Ball Head Hot Shoe Mount Adapter Ring Light Adapter for Cameras, Video Monitor, Monopod-Black, Camcorders, Gopro, LED Video Light, Smartphone, Tripod

#ad
FOTYRIG #ad - Sturdy and durable max load: 3. 5lbs. It is lightweight but made of sturdy Aluminum Alloy and precise CNC process anodized aluminum materials, sturdy and durable, it won't be easy to suffer corrosion or breakage.

Flexible positioning when you twist the locking knob control, so once you tighten the control, it can go to the exact position according to your needs by 360 degree rotation. 1/4" screw mount use to mount accessories onto a flash bracket, tripod, LED video light, flash light, camcorder, and fits for most DSLR camera, LCD monitors and other accessories with 1/4" screw thread.

The tightening wheel has threads cut in opposing directions, the ballhead will be locked without shaking and it won't move around. Standard hot shoe adapterthe hot shoe adapter has a standard 1/4" hot shoe adapter 072"*072", panasonic, olympus, pentax, it will fit most Dslr cameras Compatible with DSLR cameras Nikon, Fujifilm & Kodak.
BrandFOTYRIG #ad
ManufacturerFOTYRIG #ad
Height1.87 Inches
Length0.78 Inches
Weight0.13 Pounds
Width0.78 Inches
Part NumberPC1007
ModelPC1007

10. koolehaoda

#ad

Koolehaoda 1/4 Mini BallHead & Hot Shoe Mount Adapter for Camera Video Light Tripod Monopod 1/4 Ball Head

#ad
koolehaoda #ad - This is a mini ball head and hot shoe adapter with 1/4" tripod screw on top to mount DSLR Camera Canon Nikon tripod with hot shoe on LCD monitor, LED video light, flash light, microphone with 1/4" screw thread.

Screw mount: universal 1/4" -20 thread typ. Solid construction - made of sturdy Aluminum that withstands heavy loads. Precise cnc process and black anodized for higher durability. 360 degree rotation - comes with swivel ball head. Easy to use, a key can quickly lock or release the ball, Can quickly adjust the angle. Widely compatible - comes with international standard hot shoe for most Dslr cameras in market. The ball head bottom interface is a standard 1/4 "screw hole suitable for most tripods, monopods, light stands.
Brandkoolehaoda #ad
Manufacturerkoolehaoda #ad
Height0.67 Inches
Length1.1 Inches
Width0.67 Inches
Part NumberkoolehaodaQRP
Modelkoolehaoda ballhead