Top 10 CATV Drop Amplifier – Satellite TV Splitters

As an Amazon Associate I earn from qualifying purchases.

1. Reliable Cable Products

#ad

9 Port Bi-Directional Cable TV Splitter Signal Booster/Amplifier with Active Return Zero Signal Loss VoIP Telephone Bypass Port and F59 Terminators Antronix VR900B/AC

#ad
Reliable Cable Products #ad - Includes three F59 terminators. All models equipped with camPort auto seizing F-ports. The all ports facing down configuration provides clean wiring in any orientation. 5-year manufacturer warranty on amplifier only - not power supply.

Compare to electroline eda-ft08300 or pct vc9u. Modem port provides a connection point for voip equipment, so that a power failure will not affect services. Provides 8 amplified output ports with Active Return. All ports are loSSLESS both forward and reverse. This is a true lossless 8-port splitter. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.

6 kv surge protection and ptc short-circuit protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits. Powder coated aluminum housing - provides the most corrosion resistant protection against salt fog and rust. Does not include connection cables.
BrandReliable Cable Products #ad
ManufacturerAntronix #ad

2. PCT

#ad

2 Port HDTV Amplifier for Cable TV Antenna Signal Booster CATV Multimedia Drop Amp with Active Return PCT-MA-B1015-2A

#ad
PCT #ad - The active return path boosts broadband Communications Back to the Cable Company a Feature for Supporting Interactive Services. Meets all applicable ieee surge Standards for All Output Ports, Which Enhances System Reliability. High quality scte compliant connectors with Patented DSM Seizure Technology Provide Better Surface Contact. Boosts signal strength by +10db, digital and hdtv Picture Quality, Improves Analog, and Improves UHF/VHF/FM Antenna Reception. This amplifier provides 2 ports for multiple tV Sets, Cable Boxes, or Cable Modems - It Works With Both Cable and Antenna Signals.
BrandPCT #ad
ManufacturerPCT International #ad
Part NumberPCT-MA-B1015-2A
ModelPCT-MA-B1015-2A

3. Antronix

#ad

Cable TV RF Broadband 8dB Gain Four Output 5-1002Mhz w/ Power Adapter, Amplifier

#ad
Antronix #ad - 6 kv surge protection for protection against lightning strikes. May improve HDTV reception. 3 db noise figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters.

Coaxial cables are not included. 6 kv combination wave Surge Protection Unique surge protection on all ports. 5 year Warranty amplifier only. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. Reduces snow and prevents image pixelation with digital cable, boosts antenna OTA signals for distribution to multiple TVs. Compatible with all standard and digital cable tv services, OTA Antenna Reception.

Ptc short-circuit protected ul listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Exceeds all SCTE Standards. Not compatible on systems with an existing amplifier or pre-amplifier. Four port amplifier with a passive return path provides an increase of +7. 5 db per port. May improve cable modem performance.
BrandAntronix #ad
ManufacturerAntronix #ad
Height0.8 Inches
Length4.5 Inches
Weight0.44 Pounds
Width3.25 Inches
Part NumberMRA4-08AC
ModelMRA4-08/AC
Warranty5 year warranty from date of orginal purchase, amplifier only. Go to www.antronix.com for more info.

4. Reliable Cable Products

#ad

TV, OTA, Arris 1-Port Cable, Modem, HDTV Amplifier Signal Booster with Active Return And Coax Cable Kit

#ad
Reliable Cable Products #ad - Meets all applicable ieee surge standards for all output ports, which enhances system reliability. 1-year warranty. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications.

The active return path boosts broadband communications back to the cable company a feature for supporting interactive services. 36" white connection cable included. Boosts signal by 32x in the forward path and 10x in the reverse path. Do not use this product with an antenna, only Cable TV. Active return amplifiers are not intended for use with antennas. The amplifier should be installed BEFORE splitters and long cable runs for best results. Compatible with all standard and digital Cable TV services. The bda-42-1-ar-r is a bi-directional cable tv amplifier designed for use in homes.
BrandReliable Cable Products #ad
ManufacturerReliable Cable Products #ad
Weight1.01 Pounds
Part NumberBDA-42-1-AR-R
ModelBDA-42-1-AR-R

5. ANTRONIX MRA Series

#ad

Amplifier, Cable TV RF Broadband 15dB Gain One Output 5-1002Mhz w/ Power Adapter

#ad
ANTRONIX MRA Series #ad - Fully compliant for needs of docSIS 2. 0 d2 & 3. 0 d3 cable modem operation. 6kv surge protection on all F port, provided excellent surge survivabilty. Nickel plated housing provides long term corrosion protection, even in salt air enviroments. 3db noise figure equates to very low noise generated when amplifing digital signals. Industry leading manufacturer of Cable TV subscriber devices for over 20 years.
BrandANTRONIX MRA Series #ad
ManufacturerANTRONIX ® #ad
Height0.8 Inches
Length2.3 Inches
Weight0.29 Pounds
Width3.5 Inches
Part NumberMRA1-15
ModelMRA1-15/AC
Warranty5 year warranty from date of orginal purchase, amplifier only. Go to www.antronix.com for more info.

6. Antennas Direct

#ad

CDA4, for Indoor Use, Antennas Direct 4-Port TV Distribution Amplifier, Coaxial Cable, 4K Ready, Connect Up to 4 Televisions to 1 Antenna, Power Supply, Silver

#ad
Antennas Direct #ad - Weatherproof indoor / outdoor housing power supply component for indoor use only. Includes distribution amplifier, 3ft coaxial cable for power supply, power supply, and instructions.7. 5db amplification per port. 90 day warranty on parts. Connect one tv antenna to 4 rooms while boosting signal in each location for reliable reception.
BrandAntennas Direct #ad
ManufacturerAntennas Direct, Inc. #ad
Height1 Inches
Length4.5 Inches
Width3.63 Inches
Part NumberCDA4
ModelCDA4
WarrantyLifetime

7. Reliable Cable Products

#ad

CableTVamps, Arris 4-Port Bi-Directional Cable TV, OTA, Satellite HDTV Amplifier Splitter Signal Booster with Passive Return And Coax Cable Package

#ad
Reliable Cable Products #ad - Using with an amplified antenna may cause total loss of OTA signals. Not for use with amplifieD ANTENNAS. It will block the signal between the dish and receiver. Compatible with all standard and digital Cable TV services.

The amplifier should be installed BEFORE splitters and long cable runs for best results. Not for use with satellite dish systems. Boosts signal by 5x in the forward path. The bda-42-4-pr-r is a bi-directional cable tv amplifier and over-the-air OTA HDTV amplifier designed for use in homes. If you antenna comes with any type of power cord, it is amplified. 36" white connection cable and PCT-TT installation tool included. 1-year warranty. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. Meets all applicable ieee surge standards for all output ports, which enhances system reliability.
BrandReliable Cable Products #ad
ManufacturerArris #ad
Part NumberRCP-BDA-42-4-PR-R
ModelBDA-42-4-PR-R-WC

8. AllAboutAdapters

#ad

Premium 20-dB CATV Drop Amplifier with Fuse Protection Active Power Type

#ad
AllAboutAdapters #ad - Optimize your tv signal strength with 20db more powerful. Super low noise figure of 1. 5 db with low distortion. Provide low-noise amplification of RF signals for stable signal quality and optimal distribution across all TV channels.

 . It also has an internal fuse built in for extra safety and protection against power surge through the power line. Reduce digital tv pixelation and graininess due to low signal levels. Very suitable for installation in apartments, dormitories, hotels, etc. Recommended for use in households with less than 15 TVs chained up together. Great solution for compensating the TV signal loss caused by splitters and long cable runs.

Provides continuous coverage on all cable TV frequencies, resort/hotel/public MATV system, over-the-air UHF/VHF TV frequencies or FM frequencies. Wide operation frequency range from 10 mhz to 1000mhz. Double as drop amplifier with active power supply. Mini compact size with low power consumption. One-way indoor type rf signal amplifier for analog catv channels, digital catv system, cctv surveillance channels or FM antenna signals.
BrandAllAboutAdapters #ad
ManufacturerAllAboutAdapters #ad
Part NumberRFMP-W20
ModelRFMP-W20

9. Channel Master

#ad

TV Antenna Signal Booster for Improving Antenna or Cable TV Signals to a Single Television CM-3410,White, Channel Master Ultra Mini TV Antenna Amplifier

#ad
Channel Master #ad - Powder coated and weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate. Improves signal strength, Decreases Pixelation and May Increase Number of Channels. Miniature size for Space-Saving Installations. Works with all tv antennas & CATV Installations Not Compatible with Satellite. One amplified Output Port 15 dB.
BrandChannel Master #ad
ManufacturerChannel Master #ad
Height2.25 Inches
Length5.75 Inches
Weight0.75 Pounds
Width8.5 Inches
Part NumberCM-3410
ModelCM-3410

10. AllAboutAdapters

#ad

Premium Coax RF CATV Signal Distribution Amplifier with High 40dB Gain for Commercial Use

#ad
AllAboutAdapters #ad - Aluminum chassis provides excellent heat dissipation and long durability. Adjustable gain control and tilt control allows for easy system balancing. 20 db output/input test port is provided for easy trouble shooting. Solution in solving the problems of noise, interference and weakness after distribution.

Commercial-grade cable tv and antenna signal amplifier with high 40db output level. Supports full tv frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels. Boost rf coax signal with ease for more than 1700FT or 500m if RF TV source signal has fair 70/75dB strength to start with. Supports tv coax cable signal from cable outlet, MATV or all other RF modulated TV system. Boosts the existing catv or antenna signal strength for greater distance with minimum loss for more TV distribution. Advanced catv hybrid circuitry providing extremely low-noise figure and minimum distortion.

High-power amplification to compensate for the attenuation of the passive TV distribution components like cable, CCTV DVR, taps, DTV, antenna, cable TV box, splitters and cable outlets. Anti-interference module design with advanced noise filer built in. Designed for large multi-dwelling unitsMDU that require precise RF amplification with gain and slope adjustments for a professional installation. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system.
BrandAllAboutAdapters #ad
ManufacturerAllAboutAdapters #ad
Part NumberRFMP-W40
ModelRFMP-W40