As an Amazon Associate I earn from qualifying purchases.


Snug fit: provides 360-degree protection from wind with an airtight rubber base for a tight snug fit.


Our friendly us-based support is here to help - note: To reduce hiss when using the mic on a DSLR camera, we recommend using manual audio levels, accessible from your camera’s menu.
Use as iphone microphone, Audio Recorders, DSLR microphone or camera mic. Includes: furry "deadcat" windscreen, camcorders, tablets, 3.5mm trs output cable For DSLR Cameras, Recorders, 3. 5mm trrs output cable for Smartphones, Soft Carrying Case, and Mac.

When the recording device is turned off, the D3 pro will automatically shut down after 15 minutes of standby to save power. On each side of the dial the V-Mic D3 Pro features a bump guard that helps prevent the dial from being accidentally rotated.
The +20db of gain is added on a linear scale so you can dial in the exact amount of gain you need for the shot. 75/150hz low cut filters: instead of a switch that is sunken into the frame that's hard to toggle, the D3 Pro does it all with a single button on top of the unit. Intelligent power on/off: the d3 pro is ready in stand-by-mode after you install the battery, and automatically goes into Run-Mode when the camera or device turns on. Low noise circuitry, Extremely Low Distortion THD

Warranty: this shotgun mic blimp has a very good quality, so extend warranty to 36 months for suppporting your video work. With dead cat cover:this shotgun mic pop fliter include a dead wombat which is very effective at reduction of wind noise, when you use it on windy day or noisy environment, handling wind or noisy well, helpful for post processing audio.
Work with different shotgun mic:this microphone blimp work with most shotgun microphones up to 12. 75 inches 325 mm in length and diameter within 19-22 mm, sennheiser mkh 416, such as Rode NTG-1 NTG-2 NTG-3 NTG-4, Audio-Technica AT875R & More. Support boom pole:3/8 inch screw hole in the bottom of hanlde, so you can connect it with the boom pole arm with 3/8 inch screw.



As rode ws7 wind Shield). Superior wind protection - windshield reduces wind noise, cut down background noise for outdoor shoots, blocks out plosives, even in adverse climatic conditions. Perfect designed - the wind screen combines an open-cell foam surround with an outer layer of acoustically artificial fur.
1. Movo
#ad
Movo WS-G120 Furry Rigid Windscreen for Microphones 18-23mm in Diameter and up to 5.5" 14cm Long, Dark Gray
#adMovo #ad - Reduces wind noise by up to 40dB with minimum high frequency loss. 1 year movo warranty with USA-Based Support. Tapered rubber Base for 360-degree wind protection. Superior wind protection - Features a Simulated Rabbit Fur Outer Layer & Acoustic Foam Inner. Reduces Vocal Plosives.More information #ad
Brand | Movo #ad |
Manufacturer | Movo #ad |
Weight | 0.04 Pounds |
Part Number | WS-G120 |
Model | WS-G120 |
More information #ad
2. Movo
#ad
Sennheiser ME66, NTG-2, Audio-Technica AT-897 and More, Movo WS-S1000 Furry Outdoor Deadcat Windscreen for Shotgun Microphones up to 7-inch 18cm Long, Fits Rode VideoMic
#adMovo #ad - 1 year movo warranty with USA-Based Support. Minimizes noise and ambiance. Fits shotgun microphones up to 7-inches 18cm Long. Reduces wind Noise by up to 40dB. Large 50mm diameter opening Slips Over Existing Foam Windscreen for Extra Wind Protection.More information #ad
Brand | Movo #ad |
Manufacturer | Movo #ad |
Part Number | WS-S1000 |
Model | WS-S1000 |
More information #ad
3. Movo
#ad
Movo WS220 Professional Microphone Windscreen with Acoustic Foam Technology for Shotgun Microphones up to 20cm Long Fits Sennheiser MKE 600
#adMovo #ad - Compatibility: fits shotgun microphones 18-24mm in diameter and up to 20cm long, perfect for the Sennheiser MKE 600 and more. 1-year warranty: we’ve got your back! our products are designed to ease your technical woes, not add to them.Snug fit: provides 360-degree protection from wind with an airtight rubber base for a tight snug fit.
More information #ad
Our friendly US-Based support is here to help. Reliable: designed for minimal high-frequency loss so you can capture accurate audio for your productions. Clear audio: inner acoustic foam and outer artificial rabbit fur effectively block unwanted wind noise and background sounds of 24dB up to 40dB.Brand | Movo #ad |
Manufacturer | Movo #ad |
Part Number | WS220 |
Model | WS220 |
More information #ad
4. Rode
#ad
Rode Wireless GO II Dual Channel Wireless Microphone System
#adRode #ad - Rechargeable Batteries. Series iv 2. 4ghz Digital Transmission. 1/8" mic Inputs. 128-bit encryption - Black. Dual-channel wireless Microphone System with Built-in Microphone.More information #ad
Brand | Rode #ad |
Manufacturer | Rode #ad |
Height | 314.96 Inches |
Length | 787.4 Inches |
Weight | 0 Pounds |
Width | 590.55 Inches |
Part Number | RODEWIGOII |
Model | 400836009 |
More information #ad
5. Movo
#ad
Perfect Camera Microphone, Deadcat Windscreen, Android Smartphones, Canon EOS, Case for iPhone, Movo VXR10 Universal Video Microphone with Shock Mount, Shotgun Mic, Nikon DSLR Cameras and Camcorders
#adMovo #ad - Our products are designed to ease your technical woes, not add to them. Create: essential compact shotgun microphone for recording YouTube Vlogs, outdoor events, family vacation trips, Tik Tok, interviews, live music, tutorials.Our friendly us-based support is here to help - note: To reduce hiss when using the mic on a DSLR camera, we recommend using manual audio levels, accessible from your camera’s menu.
More information #ad
1-year warranty: we’ve got your back. Universal compatibility: external microphone for iPhone, Cameras, Androids, Tablets, Camcorders, and Laptops. Professional movo mic: the durable aluminum construction and battery-free design includes a sturdy integrated shock mount to minimize handling noise. Use as iphone microphone, Audio Recorders, DSLR microphone or camera mic. Includes: furry "deadcat" windscreen, camcorders, tablets, 3.5mm trs output cable For DSLR Cameras, Recorders, 3. 5mm trrs output cable for Smartphones, Soft Carrying Case, and Mac.
Brand | Movo #ad |
Manufacturer | Movo #ad |
Weight | 0.11 Pounds |
Part Number | VXR10 |
Model | VXR10 |
More information #ad
6. Deity
#ad
Smartphones, Camcorders, Laptop and Bodypack Transmitters, Deity V-Mic D3 Pro Super-Cardioid Directional Shotgun On-Camera Video Microphone with Rycote Shockmount for DSLRs, Tablets, Handy Recorders
#adDeity #ad - Broadcast quality sound: superior off-axis sound performance. Please note that some iOS devices require Apple's Lightning to 3. 5 mm headphone Jack AdapterNOT Included. 84db @-24db sensitivity, 14mm Prepolarized Condensor Capsule. Smart 3. 5mm trs/trrs mic output: out-of-the-box the v-mic d3 pro is compatible with dslrs, laptop, Smartphones, Handy Recorders, Camcorders, Bodypack Transmitters and Tablets.When the recording device is turned off, the D3 pro will automatically shut down after 15 minutes of standby to save power. On each side of the dial the V-Mic D3 Pro features a bump guard that helps prevent the dial from being accidentally rotated.
More information #ad
The world's only microphone with a stepless gain knob: the v-mic d3 pro features a +20db step-less analog gain adjustment dial. With two levels of low cut the V-Mic D3 Pro is ready for even the windiest day. The +20db of gain is added on a linear scale so you can dial in the exact amount of gain you need for the shot. 75/150hz low cut filters: instead of a switch that is sunken into the frame that's hard to toggle, the D3 Pro does it all with a single button on top of the unit. Intelligent power on/off: the d3 pro is ready in stand-by-mode after you install the battery, and automatically goes into Run-Mode when the camera or device turns on. Low noise circuitry, Extremely Low Distortion THD
Brand | Deity #ad |
Manufacturer | Deity V-Mic D3 Pro #ad |
Weight | 0.32 Pounds |
Part Number | AUB08TWP73NP |
More information #ad
7. DF DIGITALFOTO
#ad
Micolive Microphone Windshield Blimp Windscreen Style Protect Cage and Shock Mount Suspension System Compatible with Rode NTG1 NTG2 NTG3 NTG4 AT875R Line MKE 600 Series Shotgun Microphones etc
#adDF DIGITALFOTO #ad - Lightweight&durable:the frame is incredibly lightweight and easy to assemble, the shock mounts made by elastic material which is stable, if it is broken under warranty, providing free replacement to fix.Warranty: this shotgun mic blimp has a very good quality, so extend warranty to 36 months for suppporting your video work. With dead cat cover:this shotgun mic pop fliter include a dead wombat which is very effective at reduction of wind noise, when you use it on windy day or noisy environment, handling wind or noisy well, helpful for post processing audio.
More information #ad
Work with different shotgun mic:this microphone blimp work with most shotgun microphones up to 12. 75 inches 325 mm in length and diameter within 19-22 mm, sennheiser mkh 416, such as Rode NTG-1 NTG-2 NTG-3 NTG-4, Audio-Technica AT875R & More. Support boom pole:3/8 inch screw hole in the bottom of hanlde, so you can connect it with the boom pole arm with 3/8 inch screw.
Brand | DF DIGITALFOTO #ad |
Manufacturer | DF DIGITALFOTO #ad |
Weight | 1.32 Pounds |
Part Number | WSF-01 |
More information #ad
8. RØDE Microphones
#ad
Rode VideoMicro Compact On-Camera Microphone with Rycote Lyre Shock Mount
#adRØDE Microphones #ad - Includes rycote lyre shock mount and deluxe furry windshield. Please note: for new iphones you need to purchase an adapter as iphone requires a 1/8th Jack.More information #ad
No battery required powered by camera plug-in power - min 3V. Compact microphone designed to improve the audio quality of your videos - only 80 millimeter 3" long and 42gm 1. 5 ounce.Brand | RØDE Microphones #ad |
Manufacturer | RØDE Microphones #ad |
Height | 0.83 Inches |
Length | 3.15 Inches |
Weight | 0.09 Pounds |
Width | 0.83 Inches |
Part Number | Videomicro |
Model | Videomicro |
Warranty | 5 years. |
More information #ad
9. Ruittos
#ad
Bestshoot 5 Packs Lavalier Microphone Wind Screen Furry Muffs Diameter 1cm Fits Most Lapel Clip Lav.
#adRuittos #ad - Fits most lavalier with foam cover, that around 1cm in diameter. 5 packs lavalier microphone wind shield furry made of artificial fur. Easy to use, soft and comfortable. Deadcat lavalier windscreen to reduce noise and ambience. 1 year warranty Support.More information #ad
Brand | Ruittos #ad |
Part Number | 4336300478 |
Model | 4336300478 |
More information #ad
10. YOUSHARES
#ad
Sennheiser MKH416 Shotgun Mic, Wind Shield Up to 7.1" Long by YOUSHARES, NTG3 Microphone Windscreen, Deadcat/Windmuff for Rode NTG-3
#adYOUSHARES #ad - Professional windscreen - furry windmuff fit your rode ntg2, ntg3,sennheiser mkh416 shotgun microphone, and any shotgun mics with a maximum slot length of 180mm 7. 1" and a diameter of 18-24m.As rode ws7 wind Shield). Superior wind protection - windshield reduces wind noise, cut down background noise for outdoor shoots, blocks out plosives, even in adverse climatic conditions. Perfect designed - the wind screen combines an open-cell foam surround with an outer layer of acoustically artificial fur.
More information #ad
A rubber base blocks out any wind noise to enter the rear of the mic pickup area. Excellent protection - the wind muff keeps shougun mic safe from harmful, dust and moisture. Lightweight and portable - the wind shield is much less cumbersome and easier to carry than the Rode blimp when recording in adverse environmental conditions. Packing: 1 Fur Wind Shield.Brand | YOUSHARES #ad |
Model | Foam_Mic_RodeNTG3_02 |
More information #ad