Top 10 YI Camera Mount Suction – Car On-Dash Mounted Cameras

As an Amazon Associate I earn from qualifying purchases.

1. milsense

#ad

Suction Cup Mount for Yi Dash Cam 2.7', Uniden Dashcam, 2 Pcs, Hold Tightly Removeable Easy to Install and Stand Heat, Black Box G1w Dash Camera etc

#ad
milsense #ad - Stick to window strongly and stand heat well. Fits most popular dash camera for cars, such like g1w/ YI camera dash /Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP.

We provide 2 suction mounts, but it doesn’t mean they are poor quality, we just want to give you more benefit. Any problem in one year, just get a new one or MONEY BACK. Simple structure and friendly design, easy to install, easy to remove and reposition, EASY to adjust angle of the yi Smart Dash Cam to get a good view. One year guarantee. Our experiment shows this suction mount can hang up 9 POUNDS of cola, the yi car camera weights about 05 pound, this suction cup mount can hold the YI dash cam tightly even in a bouncy work truck.
Brandmilsense #ad
ManufacturerMILsEnse #ad
Part NumberXIPAN

2. Sportway

#ad

Sportway S30 Dash Cam Suction Mount 2nd Gen with 10pcs Joints for REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,GoPro Hero and Most Other Dash Cameras DVR GPS

#ad
Sportway #ad - The mount uses pom and abs plastics, tolerable temperature range is :-20℃~70℃, tolerable temperature range is :-40℃~120℃;the suction cup uses PVC material, and bearing weight up to 5kgs11 lb.

S30 with 10pcs different joints, falcon zero, kdlinks, transcend, suitable for most popular brand dash cam, old shark, Crosstour, z-edge, Black Box, GoPro Hero. For the corresponding brand and model, YI, VANTRUE, such as REXING, please check the picture. Easier to use than 3m double-Sided Adhesive Mount Holder Bracket, no harm to car glass. 360 degree rotation design, rotate ball adapter head provides flexibility for positioning the dash cam. Easy to install, remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield.
BrandSportway #ad
ManufactureriSportgo #ad
Height2.95 Inches
Length2.17 Inches
Weight0.12 Pounds
Width2.17 Inches
Part NumberS30
Model4326590314

3. YiePhiot

#ad

2 WipesDry and Wet, Suction Cup Mount for YI Dash Cam, 2 Glue Double Sided Adhesive Tapes, with 2 Different Pivot Swivel Points2 Pack, Glue Adhesive Mount Compatible with Yi Dash Camera

#ad
YiePhiot #ad - Easy to use: you can adjustable neck with 360 degrees rotating holder, easy to install and easy to use. Flexibility: swivel ball adapter head provides flexibility for positioning the camera. The sun won't weaken it's strength structure and it will last a long time. Durable: rugged clamping lever and swivel knob for durability and damage protection. High quality: pvc windshield suction mount performs well in hot climates. Detail: attaching to a clean and smooth surface to get maximum holding strength.
BrandYiePhiot #ad
ManufacturerYiePhiot #ad
Part Numberxy0001
Modelxy0001

4. Eaglecam

#ad

Dash Camera Suction Mount Cup Holder Vehicle Video Recorder Windshield & Dashboard for Yi Rexing V1P Dash Car DVR Camera GPS

#ad
Eaglecam #ad - Swivel ball adapter Head Provides Flexibility For Positioning The Camera. Fits most popular car dash cam such like rexing v1, v1 3rd gen, v1p/g1w/yi Smart Nightscape Dash Cam/Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP. Attaching to a clean and Smooth Surface To Get Maximum Holding Strength. Package included: 2* suction mountPlease note, the cameras above the photos are not included, only one piece of bracket included. Adjustable neck with 360 degrees rotating holder, much better and easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass.
BrandEaglecam #ad
ManufacturerEaglecam #ad
Height3.94 Inches
Length2.76 Inches
Weight0.09 Pounds
Width5.98 Inches
Part NumberHolder001
ModelHolder001

5. iSaddle

#ad

ISaddle CH02A YI Dash Camera Mount Holder Vehicle Video Recorder/Car DVR Camera Windshield & Dashboard Suction Mount Holder.

#ad
iSaddle #ad - Swivel ball adapter Head Provides Flexibility For Positioning The Camera. Easy to get a customized Holder With iSaddle Mounting Kit. Fits most popular car dash cam such like g1w/yi smart Dash Cam/Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP. Pvc windshield suction Performs Well In HOT Climates. Attaching to a clean and Smooth Surface To Get Maximum Holding Strength.
BrandiSaddle #ad
ManufactureriSaddle #ad
Height1 Inches
Length2.9 Inches
Width2.8 Inches
Part NumberCH02A
ModelCH-02A
Warranty12 Months Warranty!

6. Anumit

#ad

Dash Cam Mount, CHORTAU, APEMAN, Anumit Universal Dash Camera Rear View Mirror Mount Holder Kit for YI, Z-Edge, KDLINKS X1, E-ACE, Anker Roav, Aukey, Peztio and Most Other Dash Cam, Old Shark, Rexing

#ad
Anumit #ad - Kindly check pictures for reference before purchased. For easy installation, please make sure the car rearview has MORE THAN 04 inch space on the back of the mirror. 360° rotation freedom: adjustable ball and socket joint, be it horizontally or vertically, real 360-degree rotation design, adjust to any angle you need, the dash cam mirror mount is completely at your disposal.

Best dash cam companion: mount your dash cam behind the center of the windshield to make a safe driving, since it allows them to record a clear unobstructed view ahead and doesn't interfere with the view when driving. Anti-skidding and protectiveness: Position fixing with practical locking nut, durable construction prevents slipping and breaking and heat-resistant, dashcams for cars never fall off the windshield.

Perfect compatibility: new 16 different joints kit suitable for 99% not all dash camera, action camera, GPS and more. Strong pipe mount: tool-less and easy to install & removed, the mirror dash cam mount would be easy to lock on car rear view mirror/bike/motorcycle handlebar and any round pipe dia, Come with two long screws and two short screws, From 0.5- 2. 6 inches. The ball dia of the dash cam mount is 063inch.
BrandAnumit #ad
ManufacturerAnumit #ad
Height1 Inches
Length3 Inches
Width2 Inches
Part NumberAnumit
ModelAnumit 1058

7. OctinPris

#ad

OctinPris Dash Camera Suction Cup Mount Dashcam Mounts Holder with 13 Ball Joints Adapter for Vehicle Video Recorder Windshield & Dashboard for Dash Car DVR Camera GPS

#ad
OctinPris #ad - Car dashboard/windshield rotating 360 Degree mount holder for car DVR GPS Camcorder holder. Attaching to a clean and smooth surface to get maximum holding strength.

Dashboard suction cup diameter 5cm/1. 97inch. New 13 different joints kit suitable for most car dash cam, old shark, falcon f170, camcorder dvr on the market, z edge, YI, vANTRUE, kdlinks x1, amebay, include rexing v1, G1W G1W-H G1W-C G1W-B LS300W GT550S and other hot selling dash cam. Different joints kit to suit most Car Dash Camera, GPS, Action Camera. Pvc windshield suction performs well in hot climates. Swivel ball adapter head provides flexibility for positioning the camera.
BrandOctinPris #ad
ManufacturerOctinPris #ad

8. TiToeKi

#ad

TiToeKi Dash Cam Suction Mount with 10+ Swivel Ball Adapters Compatible with Rexing V1, Roav, Byakov, APEMAN, Pezt, UGSHD and Most Dash Cameras, Vantrue, UGSHD, Old Shark, YI, Z-Edge

#ad
TiToeKi #ad - Adjustable neck with 360 degrees rotating holder, Easy to install and easy to use. Sturdy and heat resistant, the windshield under the scorching sun, the suction cup bracket can still maintain a strong suction. Come with 10+ different joints,suitable for 99% dash cam, GPS, Different joints kit to suit most Car Dash Camera, Action Camera. What you get - 1 x dash cam mount holder, 15+ different pivot swivel points. Not compatible Garmin Dash Cam. Please attaching to a clean And Smooth Surface To Get Maximum Holding Strength.
BrandTiToeKi #ad
ManufacturerTiToeKi #ad
Part NumberTiToeKi

9. QveeQ

#ad

APEMAN, 3 x Glue Double Sided Adhesive Tapes, 3 WipesDry and Wet, YI 2.7", Dash Cam Suction Cup Mount Compatible with Crosstour, Z-Edge Z3 3" and Most Other Dash Cam with 16 Different Points

#ad
QveeQ #ad - Easy to install and remove, no residue. The dashcam mount compatible with byakov, yi 2. 7", yi nightscape, apeman, roav, rexing v1, Old Shark Dash Cam,Anker dash cam etc. Get the most adsorption. A 360-degree rotating ball adapter head for flexible positioning of the camera. Wipe the windshield and the bottom of the suction cup with alcohol cotton. Not compatible Garmin Dash Cam. Come with 9 different joints, suitable for 99% dash cam.
BrandQveeQ #ad
ManufacturerQveeQ #ad
Part Number3M-24

10. iSaddle

#ad

ISaddle Dash Cam Suction Mount, Windshield & Dashboard Suction Cup Mount Holder/w Various Joints for Yi/Rexing/Falcon/Old Shark/VANTRUE/KDLINKS/WheelWitness/.99% On-Dash Cameras Suitable

#ad
iSaddle #ad - Easy to customize! - rotate to any angle you Need and Get Best Driver's View, Easy To Customize it With iSaddle Mounting Kit. 100% money back guarantee!!! - purchase now, risk-Free.

Suit for 99% cams! - various joints fits 99% dash cams/action camsfor yi/rexing/falcon/z-edge/old Shark/VANTRUE/Rove/AUKEY/APEMAN/KDLINKS/ARECORD/HP/WheelWitness/Transcend/TaoTronics and so on. Suit for all cars! - no need to worry about the Rearview Mirror, Install to Windshield or Dashboard or Anywhere With 3M Mounting Pad. Feel free to click the "add to Cart" Button RIGHT NOW! Easy to install!!! - quick install in one second nO Tools Requires, Should Attach To Clean And Smooth Surface To Get Maximum Holding Strength.
BrandiSaddle #ad
ManufactureriSaddle #ad
Part NumberCH-MK03
ModelCH-MK03
Warranty12 Months Warranty!