Top 9 POE Injector 48V – Powerline Network Adapters

As an Amazon Associate I earn from qualifying purchases.

1. TP-Link

#ad

TP-Link PoE Injector | PoE Adapter 48V DC Passive PoE | Gigabit Ports | Up to 100 Meters325 feet | Wall Mountable Design TL-PoE4824G

#ad
TP-Link #ad - Auto-determine the necessary power requirements. Plug-and-Play, requires no configuration. Gigabit speed support. Convenient wall-mounting design. 48v passive PoE supported. Connectivity Technology: Ethernet.
BrandTP-Link #ad
ManufacturerTP-Link #ad
Height1.41 Inches
Length4.33 Inches
Weight0.35 Pounds
Width2.24 Inches
Part NumberTL-POE4824G
ModelTL-POE4824G
Warranty2 year manufacturer

2. Ubiquiti Networks

#ad

Ubiquiti Networks POE-48-24W-G 48V PoE adapter

#ad
Ubiquiti Networks #ad - Ubiquiti poe-48-24w-g power over ethernet injector - 110 v ac, 220 v ac input - 48 v dc, 500 mA Output - 1 Ethernet Input Ports - 1 Ethernet Output Ports - 24 W.
BrandUbiquiti Networks #ad
ManufacturerUbiquiti Networks #ad
Height1.18 Inches
Length3.35 Inches
Weight0.35 Pounds
Width1.69 Inches
Part NumberPOE-48-24W-G
ModelPOE-48
WarrantyTwo year warranty.

3. iCreatin

#ad

Compatible for TP-Link TL-POE150S, 10/100/1000Mbps, TRENnet TPE-113GI, 48V 15.4W Power Over Ethernet, IEEE 802.3af Compliant, Gigabit POE Injector

#ad
iCreatin #ad - If you have a PoE 802. 3af standard device, and need to use PoE technology to provide it with both network and power. Compact and cost effective poe+ injector which offer multiple protection, over load protection, such as over current protection, over voltage protection and anti-interference protection.

Ieee 802. 3af compliant. Converts a non-poe gigabit port to a poe gigabit port and network a poe device located up to 100 meters 328 ft. This poe injector equiped with 1 gigabit Ethernet port input and 1 PoE Gigabit Ethernet port output, which can offer up to 2Gbps full duplex Ethernet speeds. Away. Compatible with tl-poe150s and most gigabit 802. 3af ip camera, ip phone, Wireless IP point and other PoE devices.

Gigabit ethernet speed. Plug & play, or use it to provide power and network to a wireless ap, accommodates most installations scenarios. Whether you want to use it with an ip camera in your home or work place, no configuration is needed, a VoIP phone used in a conference room, simply connect a PoE network device, this item is very suitable as long as your device is 802.3af standard 48V PoE.
BrandiCreatin #ad
ManufactureriCreatin #ad

4. STEAMEMO

#ad

48V POE Injector Adapter Power Supply,10/100Mbps IEEE 802.3af Compliant, for Most Cisco/Polycom/Aastra Phones and More

#ad
STEAMEMO #ad - Input 110-240vdc 50 / 60hz output: 48v-05a 24w passive PoE Out put. Provides remote power to equipment through CAT 5, Ethernet cable up to 100 meters 328 ft. Ieee802. 3af power over ethernet with dc 48V 05a power supply, US Desktop plug type. Compatible with most 10/100mbps ip camera, IP phone, Wireless IP point and other PoE devices. Short circuit, over Current and Over Voltage Protection.
BrandSTEAMEMO #ad
ManufacturerSTEAMEMO #ad
Part NumberWebcam-HK108

5. iCreatin

#ad

Amcrest / Hikvision / YI / Polycom / Aastra Camera and Phones, iCreatin 48V POE Injector Adapter Power Supply,10/100Mbps IEEE 802.3af Compliant Compatible for Ubiquiti POE-48-24W

#ad
iCreatin #ad - Auto-sensing technology delivers up to 24w to an 802. 3af poe device with backwards compatibility for 802. 3af poe 15. 4w devices. Compatible with poe adapter poe-48-24w, ip phone, poe-48-24w-wh;also compatible with most 10/100Mbps IP camera, Wireless IP point and other PoE devices.

Remotely power poe device thru cat5, 7 ethernet Cable up to 328 feet100 meters, 6, Expands networks to areas with no power lines or outlets. Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios. Save protection: short circuit, over current and over voltage Protection; Wolrd Wide Input 100-240VDC, Output: Max 24Watt Passive PoE Output.
BrandiCreatin #ad
ManufactureriCreatin #ad
Height2.7 Inches
Length5.7 Inches
Weight0.3 Pounds
Width3.3 Inches
Part Number4328606459
ModelPSE-480040
Warranty1 year warranty

6. DSLRKIT

#ad

DSLRKIT Gigabit 48V 30watt PoE Injector Adapter Power Over Ethernet 802.3at af 1000Mbps

#ad
DSLRKIT #ad - Raspberry pi 3b+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter. Just plug the network cablenot included into your network switch and into the "Data In" port, then plug the cable to your device into the "PoE" port with your existing network cable.

It supplies power no matter what, so don't plug the "PoE" side into anything that isn't ready for it. This injector lets you power 802. 3af compatible devices, with no additional adapter needed. This adapter support 10/100/1000mbps gigabit ethernet connection, 8 pin as power transfer, 7, 5, Please do not connect any device that does not support the "PoE" port, RJ45 PoE port using 4, this will damage your device.

This is an 802. 3af compatible device, but it does not include the 802. 3af/802. 3at compliant detection feature. Compatible all 802. 3af poe power device as ip Phone, Gateway, Switch, IP camera, or More.
BrandDSLRKIT #ad
ManufacturerDSLRKIT #ad
Height1.77 Inches
Length3.35 Inches
Width1.97 Inches
Part NumberG 48V PoE
ModelG 48V PoE

7. PLUSPOE

#ad

10/100Mbps IEEE802.3af/at Compliant for Most Polycom / Aastra/ Ubiquiti / Amcrest / Realink IP Camera and Phones, 48V Power Over Ethernet Adapter, PoE Injector

#ad
PLUSPOE #ad - 100% test this poe power supply before shipment, comes with 30 days money back and 1 year warranty. Compact size convenient mini Design makes it easy to install the adapter into areas where space is limited, no configuration required. Remotely power equipment through CAT 5/6 Cable up to 100m 328ft. Powerful 24w passive poe output for IEEE802. 3af Devices. Short circuit, over Current and Over Voltage Protection.
BrandPLUSPOE #ad
ManufacturerPLUSPOE #ad
Part Number8541553716
Model8541553716

8. ANVISION

#ad

IEEE 802.3af/at Compliant, ANVISION 48V 1.0A Gigabit PoE Injector, Cameras, for IP Voip Phones, AP and More, 48W Power Supply Adapter with AC Cord

#ad
ANVISION #ad - Warranty: 2 years. A great solution for poe devices, the injector can be used to power PoE devices built-in poe function or module such as PoE IP Phone / IP cameras / Access Points etc.

Plug and play: provides remote power to equipment through CAT5/5e/6 Ethernet cable up to 1000Mbps, the device has a compact size makes it easy to install the adapter into areas where space is limited, without no configuration required. The poe injector is also works with non-poe devices, but a extra poe splitter will be required between this poe injector and non-poe devices. Hight power: input: ac100-240v 50/60hz, output: data & power output voltage: 48v, 1. 0a max. But also with high-power devices like 802. 3at devices more than 30 watt, make it NOT ONLY works with IEEE 802. 3af devices, output current: 08a, such as ip ptz camera, big power AP etc.
BrandANVISION #ad
ManufacturerANVISION INC #ad
Height1.57 Inches
Length5.7 Inches
Width2.48 Inches
Part NumberXA-PSE4810-2

9. Real HD

#ad

Up to 100M 328 Feet, for Most Cisco / Polycom / Aastra Phones and More, Real HD 48V 24W 0.5A POE Injector Adapter Power Supply,10/100Mbps IEEE 802.3af Compliant

#ad
Real HD #ad - Ubiquiti access point. Remotely power poe device thru cat. 5, 6, 7 cable up to 328. 1 feet100 meters. Note: do not support passive 24V PoE device E. G. Compatible with most 10/100mbps ip camera, IP phone, Wireless IP point and other PoE devices. Input 100-240vdc, output: 48v 19W passive PoE Output. Ieee802. 3af power over ethernet with 48V Power Supply.
BrandReal HD #ad
ManufacturerReal HD #ad
ModelPOE Injector Adapter(24W)