As an Amazon Associate I earn from qualifying purchases.
CanaKit #ad - Raspberry pi zero w wireless Board with on-board WiFi and Bluetooth. Usb otg cable, mini hdmi adapter, GPIO Header. Canakit premium black High-Gloss Raspberry Pi Zero Case.
waveshare #ad - This raspberry pi hub hat provides more usb capability to your pi, plus a rj45 ethernet port, 1x RJ45 Ethernet Port, which is great when you need a stable wired Ethernet connection.
Ethernet / usb hub hat for raspberry Pi, 3x USB Ports. Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port.1
iUniker #ad - Comes with 7 Including Items. Notice: pi zero Board is not included. Pi zero open Design Case. Use our power Switch to make shut down easier. Heatsink can make your Pi stay Cool.
iUniker #ad - Stable and fast. Our long term goal will be to use ssh over USB. It’s high qualified and easy to assemble, you can make your Raspberry Pi Zero became a USB Ethernet dongle in minutes.
Most of you are likely to access linux os via ssh service. Both front and back side can be inserted. As we know that raspberry pi zero is very tiny, and it does not have standard USB port to connect your standard USB devices, so it may hard to access like other Raspberry Pi version.
MakerFocus #ad - You can change raspberry pi zero or raspberry pi zero w as a u disk via P4wnP1 P4wnP1 project, and you use it as BadUSB device also; With this type of setup you can have a portable device to execute Responder or PoisonTap type attacks.
This addon board connects to a raspberry pi Zero RPi0 or Zero W Wireless via pogo pins to provide a full sized, USB Type-A connector. Instructions for use: Please get the link from the product information description below.
MakerSpot #ad - 4-port usb 2. 0 plug-and-play hub. 2-way back-power protection circuitry on Pi Zero connection path. Bus-powered from pi zero, or powered externally via the Hub's micro-USB port. Raspberry pi zero shown in the photos is for illustrative purpose only and is not included in this offer.
MakerSpot #ad - Silkscreen marking for 40-pin Pi Header reference. 164 holes of prototyping area, pre-soldered with Female Pin Header. 4 rows of 6 connected holes for power rails and other purposes. High quality HASL PCB finishing. D09mm drill holes and D1. 9mm pad size.
innomaker #ad - Support for CAN bus 2. 0a and 2. 0b specification. No external power required. The usb can module support windows system, Mac OS and Linux, Raspbianv5.
4 kernel, Ubuntu. Plug and play usb can device. Support wider can baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily. The usb to can converter module compatible with all series Raspberry Pi/Jetson Nano/Tinker Board/any single board computer, desktop and laptop.
MakerFocus #ad - You can change raspberry pi zero or raspberry pi zero w as a u disk via P4wnP1 P4wnP1 project, and you use it as BadUSB device also; With this type of setup you can have a portable device to execute Responder or PoisonTap type attacks.
Note: raspberry Pi Zero is not included. This addon board connects to a raspberry pi Zero RPi0 or Zero W Wireless via pogo pins to provide a full sized, USB Type-A connector. Instructions for use: Please get the link from the product information description below.
Geekworm #ad - The above numbers behind M are for spacer/screw/nut tooth diameter x length, the unit is mm. Note: 1. M2. 5 series standoffs + nuts + screws, Quantity: 132pcs, come with the plastic storage box to protect and storage.
Popular size: as a reason of raspberry pi hat design: gpio pin connection expansion board is about 11 mm high and the screw hole diameter is 2. 75 mm, this spacer & screw & nuts pack is a perfect installation tool for Raspbery Pi 4 Model B, Raspberry Pi 3 Model B+ / 3B / 2B /B+/3A+/A+.
5x11mm spacers; 16 x M2. 5x11+6mm spacers; 16 x M2. 5x20+6mm Spacers. Compatible with 2019 latest raspberry pi 4 model b, raspberry pi 3 model a+ / raspberry Pi 3 Model B+ B plus; 2. Example: M2. 5 x 5mm Screws. Durable material and long use life: standoffs are made of durable brass, strong, screws and nuts are made of stainless steel which anticorrosive, compact and portable.
1. CanaKit
#adCanaKit Raspberry Pi Zero W Wireless Complete Starter Kit with Premium Black Case
#adMore information #ad
Sandisk 16 gb microsd card class 10 - Pre-loaded with NOOBS. Canakit 2. 5a micro usb power supply with Noise Filter UL Listed specially designed for the Raspberry Pi 5-foot cable.| Brand | CanaKit #ad |
| Manufacturer | CanaKit #ad |
| Part Number | 99233 |
| Model | 8541612443 |
More information #ad
2. waveshare
#adEthernet/USB HUB HAT Expansion Board for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,with RJ45 10/100M Ethernet Port Based on RTL8152B Chip and Three USB Ports,Compatible with USB2.0/1.1
#adEthernet / usb hub hat for raspberry Pi, 3x USB Ports. Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port.1
More information #ad
1x rj45 10/100m port, based on the rtl8152b ethernet chip. 3x usb ports, compatible with USB2. 0/1. 1;. It can work with various versions of the pi raspberry pi b+ / zero w / zero WH, and the size of the board is designed to perfectly fit the Zero / 3B / zero w / 2b / 3B+ /4B/ Zero / Zero WH.| Brand | waveshare #ad |
| Manufacturer | Waveshare #ad |
| Part Number | ETH/USB HUB HAT Board |
| Model | ETH/USB HUB HAT Board |
More information #ad
3. iUniker
#adHeatsink for Pi Zero W 2 / W/Pi Zero 1.3 / Pi Zero WH Black, Raspberry Pi Zero 2 W Case, Raspberry Pi Zero W Case Kit with Pi Zero Heatsink, HDMI Adapter
#adMore information #ad
| Brand | iUniker #ad |
| Manufacturer | iUniker #ad |
| Height | 1.18 Inches |
| Length | 3.94 Inches |
| Weight | 0.04 Pounds |
| Width | 1.57 Inches |
| Part Number | IU-RP-032-BT |
| Model | IU-RP-032 |
More information #ad
4. iUniker
#adIUniker USB Dongle Expansion Breakout Module Kit for Raspberry Pi Zero/W， Both Front & Back Side Can Be Inserted
#adMost of you are likely to access linux os via ssh service. Both front and back side can be inserted. As we know that raspberry pi zero is very tiny, and it does not have standard USB port to connect your standard USB devices, so it may hard to access like other Raspberry Pi version.
More information #ad
It can make your raspberry pi zero became a USB stick to your computer, so that you can access your Raspberry Pi easier than before. This means that we have to configure Raspbian to treat the USB port like an Ethernet port.| Brand | iUniker #ad |
| Manufacturer | iUniker #ad |
| Height | 1.18 Inches |
| Length | 2.36 Inches |
| Width | 0.79 Inches |
| Part Number | IU-RP-072 |
| Model | IU-RP-072 |
More information #ad
5. MakerFocus
#adUSB Type-A Connector with Protective Acrylic Case for Raspberry Pi Zero or Zero W, MakerFocus Raspberry Pi Zero W USB-A Addon Board V1.1 No Data Line Required Plug in Then Play Provide A Full Sized
#adThis addon board connects to a raspberry pi Zero RPi0 or Zero W Wireless via pogo pins to provide a full sized, USB Type-A connector. Instructions for use: Please get the link from the product information description below.
More information #ad
We have a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation! Note: raspberry Pi Zero is not included.| Brand | MakerFocus #ad |
| Manufacturer | MakerFocus #ad |
| Height | 0.2 Inches |
| Length | 3.15 Inches |
| Weight | 0.05 Pounds |
| Width | 1.18 Inches |
| Part Number | IEV18JD25T57BJU |
| Model | IEV18JD25T57BJU |
More information #ad
6. MakerSpot
#adMakerSpot 4-Port Stackable USB Hub HAT for Raspberry Pi Zero V1.3 with Camera Connector and Pi Zero W with Bluetooth & WiFi
#adMore information #ad
Over current protection and led indication if power rail draws more than 2. 3a. Compatible with USB 1. 1 and 2. 0 devices. Usb 2. 0 high speed, transfer rate up to 480Mbps. Support maximum 2. 3a current if powered by external USB charger. Gold-plated and low-resistance spring-loaded pogo pins.| Brand | MakerSpot #ad |
| Manufacturer | MakerSpot #ad |
| Part Number | BH10128 |
| Model | BH10128 |
More information #ad
7. MakerSpot
#adMakerSpot Proto Board Breadboard HAT Soldered with Female Pin Connector PCB Prototyping Board for Raspberry Pi Zero W 3 Pack
#adMore information #ad
| Brand | MakerSpot #ad |
| Manufacturer | MakerSpot #ad |
| Weight | 0.04 Pounds |
| Part Number | 43272-1856 |
| Model | NA |
More information #ad
8. innomaker
#adUSB to CAN Converter Module for Raspberry Pi4/Pi3B+/Pi3/Pi ZeroW/Jetson Nano/Tinker Board and Any Single Board Computer Support Windows Linux and Mac OS
#ad4 kernel, Ubuntu. Plug and play usb can device. Support wider can baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily. The usb to can converter module compatible with all series Raspberry Pi/Jetson Nano/Tinker Board/any single board computer, desktop and laptop.
More information #ad
Provide c/python and source code with socket-CAN for RaspbianLinux, Dynamic library and demo with IOUSBKit for Mac OsBig Sur. Provides 3000v voltage isolation and 2500V ESD isolated protection on signal pins. 120 ohm resistor selectable jumper feature.| Brand | innomaker #ad |
| Manufacturer | innomaker #ad |
| Part Number | USB-CAN |
More information #ad
9. MakerFocus
#adRaspberry Pi Zero W USB-A Addon Board V1.1 No Data Line Required Plug in Then Play Provide A Full Sized, USB Type-A Connector with Protective Acrylic Case for Raspberry Pi Zero or Zero W Deep Green
#adNote: raspberry Pi Zero is not included. This addon board connects to a raspberry pi Zero RPi0 or Zero W Wireless via pogo pins to provide a full sized, USB Type-A connector. Instructions for use: Please get the link from the product information description below.
More information #ad
We have a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation! .| Brand | MakerFocus #ad |
| Manufacturer | MakerFocus #ad |
| Height | 0.2 Inches |
| Length | 3.15 Inches |
| Weight | 0.02 Pounds |
| Width | 1.18 Inches |
| Part Number | U2MEK31L7D3T42N6111 |
| Model | 8541586250 |
| Warranty | Any question please email us |
More information #ad
10. Geekworm
#adGeekworm Raspberry Pi Installation Tool 132 Pcs/Lot M2.5 Series Hex Brass Spacer/Standoff + Nuts + Screws w/Storage Case Raspberry Pi 4/3 Model B+Plus / 3B / Zero W/2W Accessories Kit
#adPopular size: as a reason of raspberry pi hat design: gpio pin connection expansion board is about 11 mm high and the screw hole diameter is 2. 75 mm, this spacer & screw & nuts pack is a perfect installation tool for Raspbery Pi 4 Model B, Raspberry Pi 3 Model B+ / 3B / 2B /B+/3A+/A+.
More information #ad
Packing list 4 x m2. 5x12+6mm spacers; 32 x m2. 5 x 5mm screws; 32 x m2. 5 nuts 16 x m2. 5x5 +5mm spacers; 16 x M2. 5x11mm spacers; 16 x M2. 5x11+6mm spacers; 16 x M2. 5x20+6mm Spacers. Compatible with 2019 latest raspberry pi 4 model b, raspberry pi 3 model a+ / raspberry Pi 3 Model B+ B plus; 2. Example: M2. 5 x 5mm Screws. Durable material and long use life: standoffs are made of durable brass, strong, screws and nuts are made of stainless steel which anticorrosive, compact and portable.
| Brand | Geekworm #ad |
| Manufacturer | Geekwrom #ad |
| Height | 2.56 Inches |
| Length | 3.07 Inches |
| Weight | 0.31 Pounds |
| Width | 0.79 Inches |
| Part Number | TB-2017-1 |
| Model | TB-479042 |
More information #ad
